4The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual storage is difficult to find and use. In the manual, the section which details vehicle seat belt types does not provide complete information.3Labels do not explain the use of LATCH. The belt path on the base is not contrasting, and the belt path on the carrier is not labeled.5-ptEvenflo Serenade39619621515Infant55Push-button-style connectors are used as LATCH attachments. The storage system for the lower anchors may be overlooked.5lb - 35lb / 19" - 32"4Manual storage is difficult to find and use. Additional sizing information is not provided. Airbag warning is buried in a bulleted list.1No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Belt routing path is not labeled. Labels do not sufficiently explain use of LATCH.5-ptGraco Infant Safe Seat8A06INC1316Infant4There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Harness must be rethread when reassembling after cleaning.4Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATCH storage. There is no labeling to indicate which position the carrier handle should be in for vehicle transportation. The belt lock-off 5lb - 30lb / up to 32"2Manual was loose in the box. Manual storage is difficult to find and use. No picture of child in the child restraint. Additional sizing information is not provided. Names in manual and on seat do not match.1No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Belt routing path labeling is not contrasting. Labels do not remind user to tighten LATCH.5-ptGraco Snugride8F24GIS31317Infant3Harness clip is not labeled. There are less than three harness slots present. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Loose parts exist when disassembling for cleaning.4Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATCH storage. There is no labeling to indicate which position the carrier handle should be in for vehicle transportation.5lb - 22lb / up to 29"52There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information is given. Labels do not remind the user to tighten LATCH.5-ptBritax Roundabout 55 (RF)E9LC72P2355Convertible3The harness must be rethreaded for child's growth. The harness must be rethreaded when reassembling after cleaning.2It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Belt-positioning features, such as lock-offs, may be confusing to use. A printed/molded line is present on the restraint that must be leveled to the gro5lb - 40lb / up to 46"4In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text only in the owner's manual.3Additional sizing information is not shown in an illustration and is given in text form only. No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. The labels do not remind the caregiver to tighten the LATCH belt. Labels do not show how to remove the tether. The caregiver must read text to properly use the tether. No instructions are given on the labels for the use of the tether.5-ptCombi Coccoro (FF)82202356Convertible1The harness clip is not labeled with placement instructions. The restraint uses a 'puzzle buckle' that does not come with an intermediate method of holding the shoulder portions of the buckle tongues together. A head hugger or body pillow covers the harness slots. The harness must be rethread to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.3Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clea20lb - 40lb / 19" - 40"5Additional sizing information is given in text only in the manual.4No additional sizing information is given. Labels do not illustrate how to prepare LATCH attachments for use. LATCH illustrations are unclear. Labels do not remind the user to tighten LATCH.5-ptCombi Coccoro (RF)82202357Convertible2The harness clip is not labeled to indicate its correct placement. The restraint uses a puzzle buckle that does not have an intermediate method of holding the two buckle tongues together. There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethread for child's growth. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1The user may need to refer to the instruction manual for guidance regarding how to use the belt-positioning feature correctly. It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible 5lb - 33lb / 19" - 36"5The manual storage is difficult to find and use. Additional sizing information is not provided in the manual. In the manual, the section which details vehicle seat belt types does not provide complete information.1An incomplete overview of methods used to install the seat is given on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. The belt routing path is not labeled. Labels do not illustrate how to prepare LATCH attachments for use. Labels do not remind the user to tighten LATCH.5-ptGraco Snugride 3217496421318Infant4There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethread for child's growth. When adjusting the harness height, mandatory pieces to the CRS must be removed and could be misplaced. The harness must be rethread when reassembling after cleaning. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.4The user may need to refer to the instruction manual for guidance regarding how to use the belt-positioning feature correctly. The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the 5lb - 32lb / up to 32"5The manual storage is difficult to find and use. Additional sizing information is not provided in the manual.1No additional sizing information is given. No additional harness slot height adjustment information is given. The belt routing path is not labeled. Labels do not explain the use of LATCH.5-ptGraco Snugride 3517635981319Infant4There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethreaded for the child's growth. When adjusting the harness height, mandatory pieces to the CRS must be removed and could be misplaced. The harness must be rethreaded when reassembling after cleaning.4The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The LATCH storage area is not labeled. There is no labeling to indicate which position the carrier handle should be i5lb - 35lb / up to 32"3The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual storage is difficult to find and use. In the manual, there is no illustration of the child in the restraint. Additional sizing information is not provided in the manual. The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.5Labels do not illustrate how to prepare LATCH attachments for use. LATCH illustrations are unclear.5-ptMaxi-Cosi Mico22371-FSB1420Infant4There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethread for child's growth. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.3It may be possible for the caregiver to mistakenly think that the seat is secured to the base. The carrier may appear to be securely installed to the base when it is not. There is no angle feedback device available. Push-button-style connectors are use5lb - 22lb / 19" - 29"3Manual was loose in the box. Manual storage is difficult to find and use. No picture of child in the child restraint. Some additional sizing information is not provided.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Belt routing path is only labeled on one side. Labels do not sufficiently explain use of LATCH.5-ptMia Moda Viva50501321Infant2Harness clip is not labeled. Buckle tongues may not be inserted into the buckle one side at a time, and the buckle does not feature an intermediate method of holding the tongues together while inserting. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Harness must be rethread when reassembling after cleaning. Restraint is not ready to use when removed from the box.5Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle.up to 22lb / up to 29"1Manual was loose in the box. Manual storage is difficult to find and use. No picture of child in the child restraint. Additional sizing information is not provided. Airbag warning is buried in a bulleted list.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information given to achieve a proper fit. Labeling is missing modes of use from the general overview given on the seat. No additional harness slot height adjustment information. Labels do not sufficiently explain use of LATCH.5-ptSafety 1st Designer 2222-322-ADA1123Infant2Harness clip is not labeled. Buckle tongues may not be inserted into the buckle one side at a time, and the buckle does not feature an intermediate method of holding the tongues together while inserting. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Loose parts exist when disassembling for cleaning.2There is no angle feedback device available. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No dedicated storage for LATCH. There is no labeling to indicate which position the carrier handle should be in for5lb - 22lb / 19" - 29"5The manual storage is difficult to find and use. In the manual, there is no illustration of the child in the restraint. Additional sizing information is given in text only in the manual. Additional sizing information is not provided in the manual.1There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information is not illustrated and is given in text only. No additional harness slot height adjustment information is given. The belt routing path is not labeled. Labels do not remind the user to tighten LATCH.5-ptSafety 1st onBoard22-078 DMS1324Infant2The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethread for child's growth. The harness must be rethread when reassembling after cleaning. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.5The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. There is no labeling to indicate which position the carrier handle should be in while the vehicle is in motion.4lb - 35lb / up to 32"5In the manual, there is no full illustration of the child in the restraint directly next to sizing information.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information is given. The belt routing path is not labeled. Labels do not explain the use of LATCH. Labels do not remind the user to tighten the LATCH belt.5-ptPeg Perego Primo Viaggio SIP 30-30IMUNOOUS35S046S0411422Infant4The harness clip is not labeled to indicate its correct placement. The harness must be rethreaded when reassembling after cleaning. Hand tools must be used to reassemble after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.5Push-button-style connectors are used as LATCH attachments.5lb - 30lb / up to 30"3The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual storage is difficult to find and use. In the manual, there is no full illustration of the child in the restraint directly next to sizing information. Additional sizing information is not provided in the manual.2There is not a picture of a child properly restrained in the CRS on the labeling. The belt routing path labeling is not contrasting and may be difficult to read. Labels do not explain the use of LATCH.5-ptSafety 1st onBoard 3522375-ALY1325Infant4There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethreaded for child's growth. The harness must be rethreaded when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.3There are not three levels of built-in recline available. The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. There is no labeling to indicate which position the carrier5lb - 35lb / up to 32"3The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual storage is difficult to find and use. In the manual, there is no illustration of the child in the restraint directly next to sizing information. In the manual, additional sizing information is present but is not located with the main sizing information.2There is not a picture of a child properly restrained in the CRS on the labeling. The belt routing path labeling is not contrasting and may be difficult to read. Labels do not show how to remove LATCH attachments from storage.5-ptSafety 1st onBoard 35 Air22395-AJH1326Infant3The restraint was not set for the smallest possible occupant. There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethreaded for child's growth. The harness must be rethreaded when reassembling after cleaning.4Belt-positioning features, such as lock-offs, may be confusing or tedious to use. Push-button-style connectors are used as LATCH attachments. There is no labeling to indicate which position the carrier handle should be in while the vehicle is in motion.4lb - 35lb / up to 32"2Manual was loose in the box. Manual storage is difficult to find and use. Additional sizing information is not provided. Airbag warning is buried in a bulleted list. Names in manual and on seat do not match.1No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Belt routing path labeling is not contrasting. Labels do not remind user to tighten LATCH.5-ptSafety 1st Starter22-315-SHA1127Infant1Harness clip is not labeled. Buckle tongues may not be inserted into the buckle one side at a time, and the buckle does not feature an intermediate method of holding the tongues together while inserting. Harness system is difficult to reach and adjust. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Loose parts exist when disassembling for cleaning.2There is no angle feedback device available. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No dedicated storage for LATCH. There is no labeling to indicate which position the carrier handle should be in for5lb - 22lb / 19" - 29"4No picture of child in the child restraint. Section on determining vehicle seatbelt type is incomplete. Manual storage cannot be accessed when the CRS is installed in this mode of use.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information. Belt routing path is not labeled. Labels do not sufficiently explain use of LATCH.5-ptBaby Trend EZ-Loc6348131Infant4Harness clip is not labeled. Buckle does not feature an intermediate method of holding buckle tongues together while inserting. Harness must be rethread when reassembling after cleaning.4Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATCH storage.5lb - 22lb / up to 28.5"4The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to route seatbelts correctly. Manual storage cannot be accessed when the CRS is installed in this mode of use.4The belt routing path is not labeled. The user may need to read text on the labels to prepare and use the lower LATCH attachments.5-ptBaby Trend Flex-LocCS31962142Infant4The harness clip is not labeled to indicate its correct placement. The restraint uses a puzzle buckle that does not have an intermediate method of holding the two buckle tongues together. The harness must be rethreaded when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.5Push-button-style connectors are used as LATCH attachments. The belt positioning feature is easy to use, but the user may have to consult the owner's manual.5lb - 30lb / up to 30"5Manual storage is difficult to find and use. Some additional sizing information is not provided.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information. Belt routing path is not labeled.5-ptBaby Trend Rigid Loc6439143Infant4Harness clip is not labeled. Buckle tongues may not be inserted one side at a time, and the buckle does not feature an intermediate method of holding buckle tongues together while inserting. Loose parts exist when disassembling for cleaning.5There is no labeling to indicate which position the carrier handle should be in for vehicle transportation.5lb - 22lb / up to 28.5"4The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual does not have a dedicated storage compartment or it hangs on a string. In the manual, there is no illustration of the child in the restraint.2There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information is not illustrated and is given in text only. No additional harness slot height adjustment information is given. Additional harness slot height adjustment guidance is in text only. LATCH illustrations are unclear. Labels do not remind the user to tighten LATCH.5-ptBritax ChaperoneE9L69P3144Infant4The restraint was not set for the smallest possible occupant. The harness must be rethread when reassembling after cleaning. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.5Push-button-style connectors are used as LATCH attachments.4lb - 30lb / up to 32"5Manual storage cannot be accessed when the CRS is installed in this mode of use.3No additional harness slot height adjustment information. Labels do not sufficiently explain use of LATCH.5-ptBritax CompanionE9L8063145Infant3Harness clip is not labeled. Harness clip requires threading to secure properly. Harness system is difficult to reach and adjust. There is a head hugger or body pillow blocking the harness slots from being visible. Loose parts exist when disassembling for cleaning.5Belt positioning features, such as lock-offs, may be confusing to use. A printed/molded line is present on the CRS that must be leveled to the ground. Push-button-style connectors are available for LATCH.4lb - 22lb / up to 30"5Manual was loose in the box.2No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Labels do not explain use of LATCH.5-ptChicco Keyfit04060414900070146Infant3Harness clip is not labeled. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Harness must be rethread when reassembling after cleaning.5There are not three levels of built-in recline available. Push-button-style connectors are available for LATCH. There is no labeling to indicate which position the carrier handle should be in for vehicle transportation.4lb - 22lb / up to 30"52No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Labels do not sufficiently explain use of LATCH.5-ptChicco Keyfit 3006061472650070147Infant3Harness clip is not labeled. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Harness must be rethread when reassembling after cleaning.5Push-button-style connectors are available for LATCH. There is no labeling to indicate which position the carrier handle should be in for vehicle transportation.4lb - 30lb / up to 30"5Manual was attached to the seat in a hard-to-find location.3No additional sizing information given to achieve a proper fit. Labels do not sufficiently explain use of LATCH.5-ptCombi Centre DX852084148Infant4Harness clip is not labeled. Buckle tongues may not be inserted one side at a time, and the buckle does not feature an intermediate method of holding both tongues together while inserting.4Belt positioning features, such as lock-offs, may be confusing to use. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATCH storage.5lb - 22lb / up to 29"3Manual storage is difficult to find and use. Some additional sizing information is not provided.2No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Labels do not sufficiently explain use of LATCH.5-ptCombi Connection8040139Infant2Seat did not arrive fully assembled. Harness clip is not labeled. There are less than three harness slots present. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Harness must be rethread when reassembling after cleaning.3Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No dedicated storage for LATCH. There is no labeling to indicate which position the carrier handle should be in for vehicle transportation.up to 22lb / up to 29"2In the manual, illustrations that show LATCH attachment orientation are not clear. The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual storage is difficult to find and use. Additional sizing information is not provided in the manual. The restraint is not pictured in a rear vehicle seat in the manual. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to prepare and route LATCH belt correctly.3No additional sizing information is given. Labels do not remind the user to tighten LATCH.5-ptCombi Shuttle8087101310Infant3The harness clip is not labeled to indicate its correct placement. The restraint uses a puzzle buckle that does not have an intermediate method of holding the two buckle tongues together. The harness is difficult to adjust for child's growth. The harness must be rethread when reassembling after cleaning. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.2The carrier may be difficult to release from the base. Belt-positioning features, such as lock-offs, may be confusing or tedious to use. A printed/molded line is present on the restraint that must be leveled to the ground. The restraint is equipped witup to 22lb / up to 29"4The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual storage is difficult to find and use.55-ptCombi Shuttle 3380971091411Infant3The harness clip is not labeled to indicate its correct placement. The restraint uses a puzzle buckle that does not have an intermediate method of holding the two buckle tongues together. The harness must be rethreaded when reassembling after cleaning. While the primary harness adjustment system does not require rethreading for a child's growth, to realize the full height capacity, the user will need to rethread the harness to a set of higher harness slots; this may be confusing and the owner's manual should be consulted.5Push-button-style connectors are used as LATCH attachments.up to 33lb / up to 33"2Manual was loose in the box. Manual storage is difficult to find and use. Some additional sizing information is not provided. Names in manual and on seat do not match.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information. Belt routing path labeling is printed in the same color as the restraint, making it difficult to read. Labels do not remind user to tighten LATCH.5-ptEddie Bauer Deluxe Infant Car Seat22-627-BYT1212Infant2Harness clip is not labeled. Buckle tongues may not be inserted one at a time, and the buckle does not feature an intermediate method of holding the tongues together while inserting. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Loose parts exist when disassembling for cleaning.2It may be possible for the caregiver to mistakenly believe that the seat is secured to the base when it is not. A printed/molded line is present on the CRS that must be leveled to the ground. Twisting is required to remove the LATCH attachments from the5lb - 22lb / 19" - 29"3The manual storage is difficult to find and use. The manual could fall out of the carrier while in use outside of the vehicle, and there is no manual storage on the CRS base. The frontal airbag warning is contained in a bulleted list and is not separated from other warnings. In the manual, the section which details vehicle seat belt types does not provide complete information. Heights and/or weights in the manual and on the seat do not match.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. The belt routing path labeling is not contrasting and may be difficult to read. Labels do not explain the use of LATCH. Labels were already peeling when the restraint was removed from the box.5-ptEvenflo Discovery 530228541213Infant4The harness clip is not labeled to indicate its correct placement. Harness slots in the pad and in the shell are misaligned or small. The harness is difficult to adjust for child's growth. The harness must be rethread for child's growth. The harness must be rethread when reassembling after cleaning. The harness must be rethread when reassembling after cleaning.2The carrier may be difficult to release from the base. The caregiver may need to tilt the carrier to remove it from the base. There are not three levels of built-in recline available. A printed/molded line is present on the restraint that must be level5lb - 22lb / 19" - 29"2The manual must be stored under the padding, but it cannot be physically attached to the seat. The manual was not attached to the restraint and was found loose in the packaging when the restraint was initially removed. Additional sizing information is given in text only in the manual. In the manual, the section which details vehicle seat belt types does not provide complete information. The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.1The belt path is not clearly labeled on the carrier. No additional sizing information is given on the labels. Additional harness slot height adjustment guidance is in text only on the labels. Labels do not illustrate how to prepare LATCH attachments for use. Labels do not remind the user to tighten LATCH. Labels were already peeling when the restraint was removed from the box.5-ptEvenflo Embrace33117191314Infant4The harness clip is not labeled to indicate its correct placement. Harness slots in the pad and in the shell are misaligned or small. The harness must be rethread for child's growth. When adjusting the harness height, mandatory pieces to the CRS must be removed and could be misplaced. The harness must be rethread when reassembling after cleaning. The harness must be rethread when reassembling after cleaning.5The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The LATCH storage area is not labeled.5lb - 22lb / 19" - 29"3In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual is stored on a string. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route the LATCH belt properly.1On the label, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH. Labels do not show how to remove the tether. No instructions are given on the labels for the use of the tether.5-ptBritax Boulevard (FF)E9L74J32334Convertible3The harness clip is not labeled with placement instructions. No illustration is given on the labels to depict conversion to the forward-facing mode from any other mode. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The user must refer to the instruction manual for guidance regarding how to use the belt-positioning feature correctly. The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clearly lab20lb - 65lb / up to 49"4The manual does not have a dedicated storage compartment or it hangs on a string. The restraint is not pictured in a rear vehicle seat in the manual. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to prepare and route LATCH belt correctly. The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.2There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information is not illustrated and is given in text only. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptBritax Boulevard (RF)E9L74J32235Convertible3The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1The user may need to refer to the instruction manual for guidance regarding how to use the belt-positioning feature correctly. It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible 5lb - 35lb / head 1" below top of restraint51There is not a picture of a child properly restrained in the CRS on the labeling. The labels do not remind the caregiver to tighten the LATCH belt. No instructions are given on the labels for the use of the tether. The tether is not labeled in the illustrations showing modes of use.5-ptBritax Boulevard 70 (FF)E9LB51K2436Convertible53The belt path may not comfortably accommodate a larger hand. The restraint's belt-positioning features may be confusing to use. The child restraint is equipped with push-button LATCH connectors.20lb - 70lb / up to 49"53Labels do not remind the user to tighten the LATCH belt. On the labels, the illustration of the restrained child does not include the chest clip.5-ptBritax Boulevard 70 (RF)E9LB51K2437Convertible5The restraint was not set for the smallest possible occupant.2It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Belt-positioning features, such as lock-offs, may be confusing to use. A printed/molded line is present on the restraint that must be leveled to the gro5lb - 40lb / up to 49"3In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual is stored on a string. The child restraint is not depicted in a rear vehicle seat in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route the LATCH belt properly.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH. Labels do not show how to remove the tether. No instructions are given on the labels for the use of the tether.5-ptBritax Boulevard CS (FF)E9L72L12338Convertible3The harness clip is not labeled with placement instructions. No illustration is given on the labels to depict conversion to the forward-facing mode from any other mode. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The user must refer to the instruction manual for guidance regarding how to use the belt-positioning feature correctly. The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clearly lab20lb - 65lb / up to 49"5The manual does not have a dedicated storage compartment or it hangs on a string. The restraint is not pictured in a rear vehicle seat in the manual. In the manual, the section which details vehicle seat belt types does not provide complete information.2There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information is not illustrated and is given in text only. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptBritax Boulevard CS (RF)E9L72L12239Convertible2The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. The harness system is difficult to reach and adjust while it is installed in the vehicle. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1The user may need to refer to the instruction manual for guidance regarding how to use the belt-positioning feature correctly. It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible 5lb - 35lb / head 1" below top of restraint4No additional sizing information is given. Caregiver must read text to route LATCH. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. No illustration is given to show caregiver how to prepare LATCH. No instructions are given for the use of the tether.5-ptBritax Decathlon (FF)E9L47J32340Convertible3The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled. Belt lock-off or positioning device is simple to use, but the user must refer to the manual for complete instructions.20lb - 65lb / up to 49"5Some additional sizing information is not provided. User must read text to prepare and route LATCH belt. Manual storage cannot be accessed when the CRS is installed in this mode of use.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Labels do not sufficiently explain use of LATCH.5-ptBritax Decathlon (RF)E9L47J32241Convertible3Harness clip is not labeled. Harness system is difficult to reach and adjust. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1May be uncomfortable for larger hands to route the belt through the path. Interference is possible between a seat component and the belt routing system. Belt positioning features, such as lock-offs, may be confusing to use. There are not three levels o5lb - 33lb / up to 49"1Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Instruction manual was hard to find when the seat was removed from the box. Caregiver must read text to route LATCH. Heights/weights in manual and on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. No illustration is given to show caregiver how to prepare LATCH. No instructions are given for the use of the tether. Height and weight information is not directly next to the illustration.5-ptBritax Diplomat (FF)E9L66692342Convertible3The harness clip is not labeled with placement instructions. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / 27" - 40"4Manual does not have a dedicated storage compartment/hangs on a string. No picture of child in the child restraint. User must read text to prepare and route LATCH belt.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Labels do not depict LATCH preparation. Sizing information is separate from illustration of the child in the restraint.5-ptBritax Diplomat (RF)E9L66692343Convertible4Harness clip is not labeled. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.2Interference is possible between a seat component and the belt routing system. Belt positioning features, such as lock-offs, may be confusing to use. There are not three levels of built-in recline available. Push-button-style connectors are available f5lb - 35lb / 22" - 33"4Warning that the safest place is the rear seat is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use. Some additional sizing information is missing.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Labels do not explain the use of LATCH.5-ptBritax Marathon (FF)E9L06272344Convertible2The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled.20lb - 65lb / up to 49"5Some additional sizing information is not provided. Manual storage cannot be accessed when the CRS is installed in this mode of use.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information. Labels do not sufficiently explain use of LATCH.5-ptBritax Marathon (RF)E9L06272345Convertible3Harness clip is not labeled. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1May be uncomfortable for larger hands to route the belt through the path. Interference is possible between a seat component and the belt routing system. Belt positioning features, such as lock-offs, may be confusing to use. There are not three levels o5lb - 33lb / 18" - 49"51The labels do not remind the caregiver to tighten the LATCH belt. No instructions are given on the labels for the use of the tether. The tether is not labeled in the illustrations showing modes of use.5-ptBritax Marathon 70 (FF)E9LB11D2446Convertible53The belt path may not comfortably accommodate a larger hand. The restraint's belt-positioning features may be confusing or tedious to use. The child restraint is equipped with push-button LATCH connectors.20lb - 70lb / up to 49"53Labels do not remind the user to tighten the LATCH belt. On the labels, the illustration of the restrained child does not include the chest clip.5-ptBritax Marathon 70 (RF)E9LB11D2447Convertible5The restraint was not set for the smallest possible occupant.2It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Belt-positioning features, such as lock-offs, may be confusing or tedious to use. A printed/molded line is present on the restraint that must be leveled5lb - 40lb / up to 49"3In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual is stored on a string. No full picture exists of a properly restrained child in the child restraint in the owner's manual. Additional sizing information is given in text only in the owner's manual. The section describing vehicle seat belt types is incomplete and may be missing important information.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptBritax Marathon CS (FF)E9L98T22348Convertible2The harness clip is not labeled with placement instructions. The harness must be rethread to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The user may need to refer to the instruction manual for guidance regarding how to use the belt-positioning feature correctly. The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clea20lb - 65lb / up to 49"5The manual does not have a dedicated storage compartment or it hangs on a string. In the manual, there is no illustration of the child in the restraint. In the manual, the section which details vehicle seat belt types does not provide complete information.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptBritax Marathon CS (RF)E9L98T22249Convertible3The harness clip is not labeled to indicate its correct placement. The harness must be rethread for child's growth. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. No angle feedback device is present. There are not three levels of built5lb - 35lb / head 1" below top of restraint4Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. Warning that the safest place is the rear seat is buried in a bulleted list.1No additional sizing information is given on the label. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Labels do not explain the use of LATCH. No instructions are given for the use of the tether.5-ptBritax Roundabout (FF)E9W39902350Convertible2The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled. Belt lock-off or positioning device is simple to use, but the user must refer to the manual for complete directions.20lb - 40lb / up to 40"5Some additional sizing information is not provided. Section on determining vehicle seatbelt type is incomplete. Manual storage cannot be accessed when the CRS is installed in this mode of use.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information. Labels do not remind user to tighten LATCH.5-ptBritax Roundabout (RF)E9L02692351Convertible3Harness clip is not labeled. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.2Interference is possible between a seat component and the belt routing system. Belt positioning features, such as lock-offs, may be confusing to use. There are not three levels of built-in recline available. There are not three levels of built-in recli5lb - 33lb / 18" - 49"3Manual storage is difficult to find and use. Additional sizing information is in text only. Airbag warning is buried in a bulleted list. Section on determining vehicle seatbelt type is incomplete. User must read text to prepare and route LATCH belt. Names in manual and on seat do not match.2No additional sizing information given to achieve a proper fit. Additional harness slot height adjustment guidance is in text only. Belt routing path is only contrasting on one side. Labels do not explain use of LATCH.5-ptEvenflo Triumph Advance (RF)38018372277Convertible4Harness clip is not labeled. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1May be uncomfortable for larger hands to route the belt through the path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the CRS that must be leveled to the ground. Twisting is require5lb - 35lb / 19" - head 1" below top of restraint5Warning that the rear seat is the safest is buried within text. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. Additional harness slot height adjustment instructions are given in text only. LATCH illustrations are unclear. Caregiver must read text to complete tether installation.5-ptGraco ComfortSport (FF)8C00BLG22378Convertible2The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / up to 40"4Additional sizing information is given in text only in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The owner's manual cannot be accessed while the restraint is installed in this mode. The owner's manual does not describe how to remove the LATCH attachments from storage.3Additional sizing information is not shown in an illustration and is given in text form only. Labels do not explain the use of LATCH. Labels do not show how to remove the tether. No instructions are given on the labels for the use of the tether.5-ptGraco ComfortSport (FF)17622682379Convertible3A head hugger or body pillow covers the harness slots. The harness must be rethreaded to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 40lb / up to 40"5Warning that the safest place is the rear seat is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. Belt path is labeled on one side only. Labels do not explain the use of LATCH. Caregiver must read text to complete tether installation.5-ptRecaro Como (FF)62200005172388Convertible3The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. The harness system may be difficult to adjust. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions.4Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled. Belt lock-off or positioning feature is easy to use, but the user must refer to the manual for complete instructions.20lb - 70lb / up to 50"4Airbag warning is not illustrated. User must read text to prepare and route LATCH belt. Child size information is separate from illustration of child in restraint.3There is not a picture of a child properly restrained in the CRS on the labeling. Belt routing path is only labeled on one side. Labels do not explain use of LATCH.5-ptRecaro Como (RF)62200005172389Convertible3Harness clip is not labeled. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual.1May be uncomfortable for larger hands to route the belt through the path. Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. Push-button-style connectors are availabl5lb - 35lb / up to 50"5In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual is stored on a string.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptBritax Roundabout 50 (FF)E9LA6Q72352Convertible2The harness clip is not labeled with placement instructions. The harness must be rethread to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 50lb / up to 51"5The manual does not have a dedicated storage compartment or it hangs on a string.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptBritax Roundabout 50 (RF)E9LA6Q72353Convertible3The harness clip is not labeled to indicate its correct placement. The harness must be rethread for child's growth. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. No angle feedback device is present. There are not three levels of built5lb - 35lb / head 1" below top of restraint51There is not a picture of a child properly restrained in the CRS directly next to the sizing information on the labeling. No indication of correct harness height is given. The labels do not remind the caregiver to tighten the LATCH belt. No instructions are given on the labels for the use of the tether. The tether is not labeled in the illustrations showing modes of use.5-ptBritax Roundabout 55 (FF)E9LC72P2354Convertible3The harness must be rethreaded to adjust height for the child's growth. The harness must be taken out and rethreaded to disassemble the seat for cleaning.3The belt path may not comfortably accommodate a larger hand. The restraint's belt-positioning features may be confusing to use. The child restraint is equipped with push-button LATCH connectors.20lb - 55lb / up to 46"3The manual was not attached to the restraint and was found loose in the packaging. Additional sizing information is given in text only in the manual. The frontal airbag warning is contained in a bulleted list and is not separated from other warnings. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to route seatbelts correctly. The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.2Each harness slot is labeled indicating the correct slots for each mode, but the labels are difficult to read as they are molded into the shell. No additional sizing information is given. Labels do not explain the use of LATCH. Labels were already peeling when the restraint was removed from the box.5-ptEvenflo Tribute 5 (RF)38118292275Convertible2The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / 19" - 40"1Additional sizing information is given in text only. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Manual is missing some information on how to determine vehicle seatbelt type. Caregiver must read text to install restraint with LATCH. Names on manual/on labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No additional sizing information is given on the label. Tether is not labeled in illustrations. Additional harness slot height adjustment instructions are given in text only. Belt path is labeled on one side only. Labels do not explain the use of LATCH. No instructions are given for the use of the tether.5-ptEvenflo Triumph Advance (FF)3801837L22276Convertible3The harness clip is not labeled with placement instructions. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.3Interference is possible between a seat component and the seat belt/LATCH belt. Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 50lb / 19" - 50"4The instruction manual storage may be difficult to find and/or use while the child restraint is installed. No additional sizing information is given in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list.3No additional sizing information is given on the label. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptCombi Zeus 360 (FF)88362358Convertible2The harness clip is not labeled with placement instructions. The restraint uses a 'puzzle buckle' that does not come with an intermediate method of holding the shoulder portions of the buckle tongues together. A head hugger or body pillow covers the harness slots. The harness must be rethreaded to adjust height for the child's growth. The harness must be taken out and rethreaded to disassemble the seat for cleaning.4The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The belt positioning feature is simple to use, but the user may need to consult the owner's manual.20lb - 40lb / up to 40"5The manual storage is difficult to find and use. In the manual, the illustration of the properly restrained child does not depict chest clip positioning.3No additional sizing information is given. Labels do not illustrate how to prepare LATCH attachments for use. Labels do not remind the user to tighten the LATCH belt.5-ptCombi Zeus 360 (RF)88362359Convertible3The harness clip is not labeled to indicate its correct placement. The restraint uses a puzzle buckle that does not have an intermediate method of holding the two buckle tongues together. There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness is difficult to adjust for child's growth. The harness must be rethreaded for child's growth. The harness must be rethreaded when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual.3A printed/molded line is present on the restraint that must be leveled to the ground. There are not three levels of built-in recline available. The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the low5lb - 33lb / 19" - 36"1Instruction manual storage is difficult to find and/or use. Additional sizing information is given in text only. Warning that the rear seat is the safest is buried within text. Caregiver must read text to route seatbelt. Caregiver must read text to route LATCH. Heights/weights in manual and on labels do not match.1No additional sizing information is given on the label. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptCombi Zeus Turn (FF)88152260Convertible2The harness clip is not labeled with placement instructions. Buckle tongues may not be inserted one side at a time, but the buckle features an intermediate method of holding the tongues together while inserting. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.3Belt positioning features may be confusing to use. Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / up to 40"2Manual storage is difficult to find and use. Additional sizing information is not provided. User must read text to route seatbelts. User must read text to prepare and route LATCH belt. Heights and/or weights in the manual do not match those on the seat.1No additional sizing information given to achieve a proper fit. Restraint is not shown in a rear vehicle seat. No additional harness slot height adjustment information. Labels do not remind user to tighten LATCH.5-ptCombi Zeus Turn (RF)88152261Convertible2Harness clip is not labeled. Buckle tongues may not be inserted one at a time, but the buckle features an intermediate method of keeping the tongues together while inserting. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual.3Belt positioning features, such as lock-offs, may be confusing to use. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATCH storage.5lb - 20lb / up to 40"2Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to use LATCH and tether. Names on manual/on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptCosco Scenera (FF)22-120-TRC2262Convertible2The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.3Interference is possible between a seat component and the seat belt/LATCH belt. Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.22lb - 40lb / 34" - 43"3Manual storage is difficult to find and use. Additional sizing information is not provided. Airbag warning is buried in a bulleted list. Names in manual and on seat do not match.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information. Belt routing path is not labeled. Labels do not remind user to tighten LATCH.5-ptCosco Scenera (RF)22-120-TRC2263Convertible3Harness clip is not labeled. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATC5lb - 35lb / 19" - 36"2Additional sizing information is given in text only. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. The manual is missing some information about determining vehicle seat belt type. Caregiver must read text to route LATCH. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No additional sizing information is given on the label. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Labels do not explain the use of LATCH. No instructions are given for the use of the tether.5-ptEvenflo Titan Elite (FF)37016612270Convertible2The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethread to disassemble the seat for cleaning.3Interference is possible between a seat component and the seat belt/LATCH belt. Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.35lb - 50lb / up to 47"4Additional sizing information is in text only. Airbag warning is buried in a bulleted list. Section on determining vehicle seatbelt type is incomplete. Heights and/or weights in the manual do not match those on the seat.2There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information is given in text only. No additional harness slot height adjustment information. Labels do not sufficiently explain use of LATCH.5-ptEvenflo Titan Elite (RF)37016612371Convertible3Harness clip is not labeled. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual.1Interference is possible between a seat component and the belt routing system. No angle feedback device is present. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATCH storage.5lb - 35lb / at least 19"3Additional sizing information is given in text only. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to route seatbelt. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No additional sizing information is given on the label. Tether is not labeled in illustrations. Additional harness slot height adjustment instructions are given in text only. Labels do not explain the use of LATCH. No instructions are given for the use of the tether.Overhead ShieldEvenflo Tribute (FF)37816882272Convertible2The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethread to disassemble the seat for cleaning. Adjusting/removing the shield involves a simple action, but the user must refer to the manual for instructions.3Interference is possible between a seat component and the seat belt/LATCH belt. Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / up to 40"2Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. Warning that the safest place is the rear seat is buried in a bulleted list. Names on manual/on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.Overhead ShieldCosco Scenera Versa-Fit (FF)22-145-BVL2264Convertible2The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.3Interference is possible between a seat component and the seat belt/LATCH belt. Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.22lb - 40lb / 34" - 43"3Manual storage is difficult to find and use. Additional sizing information is not provided. Airbag warning is buried in a bulleted list. Names in manual and on seat do not match.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information. Belt routing path is not labeled. Labels do not remind user to tighten LATCH.Overhead ShieldCosco Scenera Versa-Fit (RF)22-145-BVL2265Convertible3Harness clip is not labeled. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual.1Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATC5lb - 35lb / 19" - 36"4The manual does not differentiate between lap and lap-shoulder belt in the installation section. The user must read text to route the LATCH belt properly. The manual cannot be accessed when the child restraint is installed in the vehicle. In the manual, the section which details vehicle seat belt types does not provide complete information.4Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptEvenflo Momentum 65 DLX with SureLatch (FF)38519982466Convertible4Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The LATCH attachment and/or tether storage area is not clearly labeled. The child restraint is equipped with push-button LATCH connectors.20lb - 65lb / 19" - 50"5Additional sizing information is not provided in the manual. In the manual, the section which details vehicle seat belt types does not provide complete information. The user's manual cannot be accessed when the restraint is installed in this mode.1No additional sizing information is given. No additional harness slot height adjustment information is given. The belt routing path is not labeled. Labels do not illustrate how to prepare LATCH attachments for use.5-ptTeutonia T-Tario 328A22PDG1328Infant4There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethread for child's growth. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.4The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The LATCH storage area is not labeled. There is no labeling to indicate which position the carrier handle should be i5lb - 32lb / up to 32"5The manual storage is difficult to find and use.55-ptThe First Years ViaI450-AUR1529Infant5There are less than three harness adjustment heights present.5Push-button-style connectors are used as LATCH attachments.4lb - 22lb / up to 30"51There is not a picture of a child properly restrained in the CRS on the labeling. The labels do not remind the caregiver to tighten the LATCH belt. No instructions are given on the labels for the use of the tether. The tether is not labeled in the illustrations showing modes of use.5-ptBritax Advocate 70 CS (FF)E9LB91A2430Convertible53The belt path may not comfortably accommodate a larger hand. The restraint's belt-positioning features may be confusing to use. The child restraint is equipped with push-button LATCH connectors.20lb - 70lb / up to 49"53There is not a picture of a child properly restrained in the CRS on the labeling. Labels do not remind the user to tighten the LATCH belt.5-ptBritax Advocate 70 CS (RF)E9LB91A2431Convertible5The restraint was not set for the smallest possible occupant.2It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Belt-positioning features, such as lock-offs, may be confusing to use. A printed/molded line is present on the restraint that must be leveled to the gro5lb - 40lb / up to 49"3In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual is stored on a string. No full picture exists of a properly restrained child in the child restraint in the owner's manual. The user must read text to route the LATCH belt properly.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. Additional sizing information is not shown in an illustration and is given in text form only. No indication of correct harness height is given. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptBritax Advocate CS (FF)E9L73N72332Convertible4The harness clip is not labeled with placement instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The user may need to refer to the owner's manual to properly use the restraint's belt-positioning feature, though it is simple to use. The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is 20lb - 65lb / up to 49"5The manual does not have a dedicated storage compartment or it hangs on a string. In the manual, there is no illustration of the child in the restraint. The user must read text to prepare and route LATCH belt correctly.2There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information is not illustrated and is given in text only. No additional sizing information is given. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptBritax Advocate CS (RF)E9L73N72333Convertible4The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. The harness must be rethread when reassembling after cleaning. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. No angle feedback device is present. There are not three levels of built5lb - 35lb / up to 49"3The instruction manual storage is difficult to find and/or use while the child restraint is installed. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The warning that indicates that the rear seat is the safest place for children is not illustrated in the owner's manual. The section describing vehicle seat belt types is incomplete and may be missing important information. In the manual, the illustration of a properly restrained child is not directly next to height and weight information. In the manual, the tether is not illustrated for all of the possible methods of installation.1There is not a picture of a child properly restrained in the CRS on the labeling. Labels do not explain the use of LATCH. The caregiver must read text to properly use the tether. On the labels, the illustrations depicting each method of installation are not labeled. There is a label depicting where the harness straps should be placed, but the harness slots themselves are not each labeled for forward-facing or rear-facing use.5-ptRecaro Como G2 (FF)331.02.MM1K2390Convertible3The harness clip is not labeled with placement instructions. The harness must be rethread to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning.4The restraint's belt-positioning features may be confusing or tedious to use. The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 70lb / up to 50"4The frontal airbag warning is buried within text and is not prominently displayed separate from other warnings. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to route seatbelts correctly. The manual does not remind the user to tighten the LATCH belt. In the manual, the illustration depicting a properly restrained child is not directly next to the height and weight information.1There is not a picture of a child properly restrained in the CRS on the labeling. Labels do not illustrate how to prepare LATCH attachments for use. On the labels, the illustrations that depict the methods of installing the seat are not labeled. There is a label depicting where the harness straps should be placed, but the harness slots themselves are not each labeled for forward-facing or rear-facing use. Belt path labeling may be overlooked.5-ptRecaro Como G2 (RF)331.02.MM1K2191Convertible2The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / up to 50"5The manual cannot be accessed when seat is installed in this mode.3Labels do not explain the use of LATCH. Labels do not show how to remove the tether. The tether is not labeled in the illustrations showing modes of use.5-ptRecaro ProRide (FF)5002585472492Convertible3The harness clip is not labeled with placement instructions. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The child restraint is equipped with push-button LATCH connectors. The belt positioning feature is easy to use, but the caregiver may need to reference the manual to use it.20lb - 70lb / up to 50"53Labels do not explain the use of LATCH. Some illustrations depicting installation methods for this mode are not labeled on the restraint's labels.5-ptRecaro ProRide (RF)5002585472493Convertible5The harness clip is not labeled to indicate its correct placement. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.2It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / up to 22.5"5Warning that the safest place is the rear seat is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. Belt path is labeled on one side only. Labels do not explain the use of LATCH. Caregiver must read text to complete tether installation.5-ptRecaro Signo (FF)71100006082494Convertible4The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions.4Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled. Belt lock-off or positioning feature is simple to use, but the user must refer to the manual for complete instructions.20lb - 70lb / up to 50"4Airbag warning is not illustrated. User must read text to prepare and route LATCH belt. Child size information is separate from an illustration of a child in the restraint.3There is not a picture of a child properly restrained in the CRS on the labeling. Belt routing path is only labeled on one side. Labels do not explain use of LATCH.5-ptRecaro Signo (RF)71100006082395Convertible4Harness clip is not labeled. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual.1May be uncomfortable for larger hands to route the belt through the path. Interference is possible between a seat component and the belt routing system. No angle feedback device is present. There are not three levels of built-in recline available. Pus5lb - 35lb / head 1" below top of restraint1Instruction manual storage is difficult to find and/or use. Additional sizing information is given in text only. Warning that the safest place is the rear seat is buried in a bulleted list. Heights/weights in manual and on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not explain the use of LATCH. Caregiver must read text to complete tether installation.5-ptMaxi-Cosi Priori (FF)22-476-NFR2286Convertible2The harness clip is not labeled with placement instructions. The padding and the shell may be misaligned, causing difficulty in threading the shoulder portions of the harness. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled. Belt lock-off or positioning feature is simple to use, but the user must refer to the manual for complete instructions.22lb - 40lb / 34" - 43"3Manual storage is difficult to find and use. No picture of child in the child restraint. Additional sizing information is not provided. Names in manual and on seat do not match.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Belt routing path is only labeled on one side. Labels do not depict LATCH preparation.5-ptMaxi-Cosi Priori (RF)22-476-NFR2287Convertible3Harness clip is not labeled. Harness slots in pad and in shell are misaligned or small. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.2Interference is possible between a seat component and the belt routing system. No angle feedback device is present. Push-button-style connectors are available for LATCH. No label to denote LATCH storage.5lb - 35lb / 19" - 36"5Methods of installation are not broken down by seat belt type in the manual. In the manual, the section which details vehicle seat belt types does not provide complete information.5Labels do not explain the use of LATCH.5-ptEvenflo Momentum 65 DLX with SureLatch (RF)38519982467Convertible3The restraint was not set for the smallest possible occupant. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.2Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to the ground. There are not three levels of built-in recline available for this mode. Push-button-sty5lb - 40lb / 19" - 50"4The instruction manual storage may be difficult to find and/or use while the child restraint is installed. The manual does not differentiate between lap and lap-shoulder belt in the installation section. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route the LATCH belt properly.4Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptEvenflo Momentum 65 LX with Quick Connectors (FF)38519782468Convertible4Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 65lb / 19" - 50"5Methods of installation are not broken down by seat belt type in the manual. In the manual, the section which details vehicle seat belt types does not provide complete information.4Labels do not explain the use of LATCH. Labels were peeling when the restraint was removed from its packaging.5-ptEvenflo Momentum 65 LX with Quick Connectors (RF)38519782469Convertible3The restraint was not set for the smallest possible occupant. Multiple actions are required to convert the seat to this mode of use; these must be followed in the manual. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.4A printed/molded line is present on the restraint that must be leveled to the ground. There are not three levels of built-in recline available for this mode. Push-button-style connectors are used as LATCH attachments. The LATCH storage area is not labe5lb - 40lb / 19" - 50"5Additional sizing information is in text only. Airbag warning is buried in a bulleted list. Section on determining vehicle seatbelt type is incomplete.3No additional sizing information given to achieve a proper fit. Additional harness slot height adjustment guidance is in text only. Labels do not remind user to tighten LATCH.Overhead ShieldEvenflo Tribute (RF)37816882373Convertible3Harness clip is not labeled. The harness must be rethread for child's growth. Harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Need to read text to remove or adjust the shield.1Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATC5lb - 40lb / 19" - head 1" below top of restraint3In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text only in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route the LATCH belt properly.1On the labels, the tether is shown but not labeled with each mode of installation. Additional sizing information is not shown in an illustration and is given in text form only. No indication of correct harness height is given. Additional harness height adjustment instructions are given in text only. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptEvenflo Chase (FF)329186342138Combination3The harness clip is not labeled with placement instructions. The padding and the shell may be misaligned, causing difficulty in threading the shoulder portions of the harness. The harness must be rethread to adjust height for the child's growth. No illustration is given on the labels to depict conversion to the forward-facing mode from any other mode. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning.3The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 40lb / 29" - 43"5Warning that the rear seat is the safest place is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.4No picture of a properly restrained child is provided.High BackEvenflo Express (B)318119844139Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.530lb - 100lb / up to 54"3All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to route seatbelt. Caregiver must read text to route LATCH. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No additional sizing information is given on the label. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptEvenflo Express (FF)318119843140Combination3The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethread to disassemble the seat for cleaning.4Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / at least 29"2Additional sizing information is given in text form. Warning that the rear seat is the safest place is buried in a bulleted list. Warning against using the lap belt only is not given in the belt routing section of the manual. Heights/weights in the manual and on the labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Additional sizing information may be missing.High BackEvenflo Generations (B)3521746L143141Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Loose parts are generated while disassembling for cleaning.4The shoulder belt may fall out of the shoulder belt positioning device.30lb - 100lb / 37" - 57"2Additional sizing information is given in text only. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to route seatbelt. Caregiver must read text to route LATCH. Names on manual/on labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.1Tether is not labeled in illustrations. No indication of correct harness slot height is given. Labels do not explain the use of LATCH. No instructions are given for the use of the tether. Additional sizing information is given in text only.5-ptEvenflo Generations (FF)352174642142Combination2The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning. Restraint was not ready to use when removed from its packaging.4Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / 29" - 43"4The owner's manual was difficult to locate when the restraint was taken out of its packaging. The instruction manual is difficult to find and/or use while the child restraint is installed. No additional sizing information is given in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.4Additional sizing information that describes a proper fit may be missing from the labels.High BackEvenflo Generations 65 (B)376198144143Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.530lb - 100lb / 37" - 57"3In the instructions, the tether is shown but not labeled with each mode of installation. Additional sizing information is given in text only in the owner's manual. All methods of installation are not labeled in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route seatbelt properly. The user must read text to route the LATCH belt properly.1Each harness slot is labeled indicating the correct slots for each mode, but the labels are difficult to read as they are molded into the shell. On the labeling, the height and weight requirements are not directly next to an illustration of a child in the CRS. On the labels, the tether is shown but not labeled with each mode of installation. Labels do not explain the use of LATCH. No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. The labels do not remind the caregiver to tighten the LATCH belt. No instructions are given on the labels for the use of the tether.5-ptEvenflo Tribute 5 (FF)38118292274Convertible3The harness clip is not labeled with placement instructions. The harness must be rethread to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning.1The belt path may not comfortably accommodate a larger hand. Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle20lb - 40lb / up to 40"4The instruction manual is difficult to find and/or use while the child restraint is installed. No additional sizing information is given in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning that the rear seat is the safest place for children is not illustrated clearly in the manual.4Additional sizing information is not illustrated and is given in text form only on the labels. The belt path is not labeled.High BackEddie Bauer Deluxe Highback Booster (B)22800-CHL43133Combination1To convert this child restraint to this mode of use from any other mode of use, the user must perform complicated steps. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.540lb - 100lb / 43" - 52"4In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. No full picture exists of a properly restrained child in the child restraint in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. The belt path is labeled on one side only. No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. The labels do not remind the caregiver to tighten the LATCH belt.5-ptEddie Bauer Deluxe Highback Booster (FF)22800-CHL43134Combination3The restraint did not arrive fully assembled. The harness height may be difficult to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. Hand tools are required to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. No storage area exists for the LATCH attachments and/or the tether.22lb - 40lb / 34" - 43"3Instruction manual is difficult to find and/or use. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information is given in text form. Belt path is not labeled.High BackEddie Bauer Highback (B)22880-BYT43135Combination2540lb - 100lb / 43" - 57"3Instruction manual was loose in the box when the restraint was removed. Instruction manual storage is difficult to find and/or use. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to route LATCH.2No picture of child properly restrained in seat. No indication of correct harness slot height is given. Belt path is not labeled. Labels do not remind caregiver to tighten LATCH belt.5-ptEddie Bauer Highback (FF)22880-BYT43136Combination3The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"3The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning against using a lap belt only is not illustrated in the manual.3Additional sizing information that describes a proper fit may be missing from the labels. The belt path is not labeled.High BackEvenflo Chase (B)329186343137Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.530lb - 100lb / up to 54"3The instruction manual storage is difficult to find and/or use while the child restraint is installed. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The warning that indicates that the rear seat is the safest place for children is not illustrated in the owner's manual. The section describing vehicle seat belt types is incomplete and may be missing important information. In the manual, the illustration of a properly restrained child is not directly next to height and weight information. The tether is not mentioned in all configurations in which it may be used.2There is not a picture of a child properly restrained in the CRS on the labeling. Labels do not explain the use of LATCH. Labels do not show how to remove the tether. On the labels, the illustrations depicting the methods of installation are not labeled.5-ptRecaro Signo G2 (FF)330.02.MM1C2396Convertible4The harness clip is not labeled with placement instructions. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The restraint's belt-positioning features may be confusing or tedious to use. The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 70lb / up to 50"3The manual was not attached to the restraint and was found loose in the packaging. The frontal airbag warning is buried within text and is not prominently displayed separate from other warnings. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to route seatbelts correctly. The manual does not remind the user to tighten the LATCH belt. In the manual, the illustration depicting the properly restrained child is not directly next to information describing the proper size range.1There is not a picture of a child properly restrained in the CRS on the labeling. Labels do not illustrate how to prepare LATCH attachments for use. On the labels, the illustrations that depict the methods of installing the seat are not labeled. Belt path labeling may be overlooked.5-ptRecaro Signo G2 (RF)330.02.MM1C2297Convertible4The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / up to 50"5The user's manual cannot be accessed when the restraint is installed in this mode. The owner's manual does not explain how to prepare the lower attachments and tether for use.4No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. Labels do not show how to remove the tether.5-ptSafety 1st Complete Air (FF)22430-MCK2498Convertible4Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clearly labeled.22lb - 50lb / 34" - 45"4The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The user must read text to prepare and route LATCH belt correctly. The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.2Labels do not illustrate how to prepare LATCH attachments for use.5-ptSafety 1st Complete Air (RF)22430-MCK2299Convertible3The restraint was not set for the smallest possible occupant. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 40lb / 19" - 40"2Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. Warning that the safest place is the rear seat is buried in a bulleted list. Names on manual/on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptSafety 1st Uptown (FF)22-475-BVL22100Convertible2The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.22lb - 40lb / 34" - 43"1Manual was loose in the box. Manual storage is difficult to find and use. No picture of child in the child restraint. Airbag warning is buried in a bulleted list. The manual does not remind the user to tighten the LATCH belt. Names in manual and on seat do not match.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional harness slot height adjustment information. Belt routing path is only labeled on one side. Labels do not remind user to tighten LATCH.5-ptSafety 1st Uptown (RF)22-475-BVL21101Convertible2Harness clip is not labeled. Harness system is difficult to reach and adjust. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATC5lb - 35lb / 19" - 36"3In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual is stored on a string. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The warning that indicates that the rear seat is the safest place for children is not illustrated in the owner's manual. The section describing vehicle seat belt types is incomplete and may be missing important information.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptSunshine Kids Radian 65 (FF)1650023102Convertible3The padding and the shell may be misaligned, causing difficulty in threading the shoulder portions of the harness. The harness must be rethread to adjust height for the child's growth. No illustration is given on the labels to depict conversion to the forward-facing mode from any other mode. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The child restraint is equipped with push-button LATCH connectors.20lb - 65lb / up to 53"5Airbag warning is buried within text. User must read text to prepare and route LATCH belt.3No additional sizing information given to achieve a proper fit. Additional harness slot height adjustment guidance is in text only. Labels do not sufficiently explain use of LATCH.5-ptGraco ComfortSport (RF)8C00BLG22380Convertible3Harness clip is not labeled. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label to denote LATC5lb - 30lb / head 1" below top of restraint5The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.5Labels do not explain the use of LATCH.5-ptGraco ComfortSport (RF)17622682381Convertible2The restraint was not set for the smallest possible occupant. There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethreaded for child's growth. There are no pictures on the labels to describe how to convert this restraint to rear-facing mode. The harness must be rethreaded when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.2Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anch5lb - 30lb / head 1" below top of restraint3The instruction manual does not not show how to prepare LATCH and tether for use. In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text only in the owner's manual. The warning that the rear seat is the safest for children is located within text and is not prominently displayed.3Harness slots are not labeled to indicate which may be used in the rear-facing mode and which may be used in the forward-facing mode. No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. LATCH illustrations are unclear on the labels. The labels do not remind the caregiver to tighten the LATCH belt. Labels do not show how to remove the tether.5-ptGraco MyRide65 (FF)17571332382Convertible4A head hugger or body pillow covers the harness slots. The harness must be rethread to adjust height for the child's growth. The harness must be taken out and rethreaded to disassemble the seat for cleaning.3Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle.20lb - 65lb / up to 49"4The instruction manual storage may be difficult to find and/or use while the child restraint is installed. In the manual, only lap/shoulder belt instructions are given; there are no lap belt only instructions. The manual doesn't show how to prepare lower attachments and tether for use.4No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. The labels do not remind the caregiver to tighten the LATCH belt. Labels do not show how to remove the tether.5-ptGraco MyRide65 (FF)17562912483Convertible4A head hugger or body pillow covers the harness slots. The harness must be rethreaded to adjust height for the child's growth. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle.20lb - 65lb / up to 50"5The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use. No instructions are provided for a lap-belt only installation.3Harness slots are not labeled to indicate which may be used in the rear-facing mode and which may be used in the forward-facing mode. Labels do not illustrate how to prepare LATCH attachments for use. Labels do not remind the user to tighten LATCH.5-ptGraco MyRide65 (RF)17571332484Convertible4There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethread for child's growth. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning.2Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anch5lb - 40lb / head 1" below top of restraint5The manual does not have a dedicated storage compartment or it hangs on a string. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to prepare and route LATCH belt correctly.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptSunshine Kids Radian XT (RF)1950022107Convertible2The restraint was not set for the smallest possible occupant. Harness slots in the pad and in the shell are misaligned or small. The harness must be rethread for child's growth. There are no pictures on the labels to describe how to convert this restraint to rear-facing mode. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. No angle feedback device is present. There are not three levels of built5lb - 35lb / up to 53"4Warning that the rear seat is the safest place for children is buried in a bulleted list of other warnings. The caregiver must read text to correctly prepare and route the LATCH belt. The tether is not labeled in the general overview of methods in which the restraint may be installed.3No additional harness slot height adjustment information is given. Labels do not clearly depict LATCH preparation. Labels do not remind caregiver to tighten LATCH belt. The caregiver must read text written on the labels to complete tether installation correctly. No instructions are given for the use of the tether on the restraint itself; the caregiver must refer to the restraint owner's manual to properly install the tether. The tether is not labeled in the general overview of methods in which the restraint may be installed.5-ptThe First Years True Fit (FF)C630-SBL24108Convertible4The harness clip is not labeled to indicate proper placement. Multiple actions are required to convert the seat to the forward-facing mode from other modes; these must be carefully followed in the manual.5Push-button-style connectors are used for LATCH that do not require twisting to remove from the vehicle. No label is posted on the restraint to denote LATCH storage.23lb - 65lb / up to 50"5The user must read text to route seatbelts correctly. The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.5Labels do not illustrate how to prepare LATCH attachments for use. Labels do not remind the user to tighten the LATCH belt.5-ptGraco MyRide65 (RF)17562912485Convertible4There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethreaded for child's growth. The harness must be rethreaded when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.2Interference is possible between a seat component and the belt routing system. There are not three levels of built-in recline available. The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anch5lb - 40lb / head 1" below top of restraint4The instruction manual is stored on a string. The instruction manual is difficult to find and/or use. Warning specifically against using a lap belt only is not illustrated.4No illustration shows the child in the child restraint. Additional sizing information is given in text form. The 'no lap belt only' warning is not illustrated in the labeling.High BackBritax Frontier (B)E9L54H644121Combination1Loose parts are generated while disassembling for cleaning.540lb - 100lb / 42" - 60"4The owner's manual does not have a dedicated storage compartment and hangs on a string. Owner's manual storage is difficult to find and use. The caregiver must read text to correctly route the seat belt. The tether is not specifically labeled in the general overview of allowable installation methods. Illustration depicting LATCH removal is located in a separate section from installation instructions, which could potentially confuse consumers.1No illustration shows the child in the child restraint. No additional harness slot height adjustment information is given. Belt routing path is not labeled. Labels do not clearly depict LATCH preparation. Labels do not remind caregiver to tighten LATCH belt. Labels do not show the caregiver how to remove tether from its storage. The caregiver must read text written on the labels to complete tether installation correctly. No instructions are given for the use of the tether on the restraint itself; the caregiver must refer to the restraint owner's manual to properly install the tether. The tether is not specifically labeled in the general overview of allowable installation methods.5-ptBritax Frontier (FF)E9L54H643122Combination4The harness clip is not labeled to indicate proper placement. The harness system must be rethread when reassembling after cleaning. Loose parts exist when disassembling for cleaning.5Push-button-style connectors are used for LATCH that do not require twisting to remove from the vehicle. No label is posted on the restraint to denote LATCH storage.25lb - 80lb / 30" - 53"3The instruction manual may be difficult to find and/or use while the child restraint is installed.3On the labels, the "Lap-Shoulder Belt" method is incorrectly labeled as "Lap Belt". Labels do not explicitly warn against using a lap-only belt.High BackBritax Frontier 85 (B)E9LC2E743123Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Hand tools may be required to disassemble the restraint for cleaning. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.540lb - 120lb / 42" - 65"5The instruction manual storage may be difficult to find and/or use while the child restraint is installed. The user must read text to route the LATCH belt properly. In the manual, there is no close-up view of LATCH attachment orientation.4The labels do not remind the caregiver to tighten the LATCH belt. Labels do not show how to remove the tether. No instructions are given on the labels for the use of the tether.5-ptBritax Frontier 85 (FF)E9LC2E744124Combination4The harness must be removed to disassemble the seat for cleaning. The harness must be rethreaded back into the restraint when switching from booster mode to harnessed mode.5The child restraint is equipped with push-button LATCH connectors. The storage location for the tether may be overlooked.25lb - 85lb / 30" - 57"2Instruction manual is difficult to find and/or use. There is no full picture of a properly restrained child. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information is given in text form. Belt path labeling is not contrasting.High BackCosco Highback (B)22-206-GTH42125Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.3The shoulder belt positioning device does not allow the belt to move freely and can create slack in the belt, causing an improper fit.40lb - 80lb / 43" - 52"2Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Names on manual/on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is not labeled. LATCH illustrations are unclear. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptCosco Highback (FF)22-206-GTH42126Combination3The harness clip is not labeled with placement instructions. Child restraint has less than three harness adjustment slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"2Instruction manual is difficult to find and/or use. There is no full picture of a properly restrained child. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information is given in text form. Belt path is not labeled.High BackCosco Ventura (B)22-248-BVL43127Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.540lb - 80lb / 43" - 52"2Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Names on manual/on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is not labeled. LATCH illustrations are unclear. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptCosco Ventura (FF)22-248-BVL42128Combination2The harness clip is not labeled with placement instructions. Child restraint has less than three harness adjustment slots. The padding and the shell may be misaligned, causing difficulty in threading the shoulder portions of the harness. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.2Tether adjustment requires two hands. Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"2Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Names on manual/on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptEddie Bauer Comfort Highback (FF)22-868-LRS42130Combination3The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.2Tether adjustment requires two hands. Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"2Instruction manual is difficult to find and/or use. There is no full picture of a properly restrained child. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information is given in text form. Belt path is not labeled.High BackEddie Bauer Comfort Highback (B)22-868-LRS43129Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.540lb - 100lb / 43" - 52"2Instruction manual is difficult to find and/or use. There is no full picture of a properly restrained child. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match. Some additional sizing information is not given in the manual.4Additional sizing information is given in text form. Belt path is labeled only on one side.High BackEddie Bauer Deluxe Booster (B)22-865-LAT43131Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Loose parts are generated while disassembling for cleaning.540lb - 100lb / 43" - 52"1Instruction manual was loose in the box when the restraint was removed. Instruction manual storage is difficult to find and/or use. Additional sizing information is given in text only. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to route LATCH. Names on manual/on labels do not match.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptEddie Bauer Deluxe Booster (FF)22-865-LAT42132Combination3The harness clip is not labeled with placement instructions. The harness system may be difficult to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.1Belt path may not comfortably accommodate a 95th percentile male hand. Tether adjustment requires two hands. Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"4Additional sizing information is given in text only in the owner's manual. The user must read text to route the LATCH belt properly. The manual storage system cannot be accessed in this mode of use. The tether is not labeled on the general overview of methods in which the restraint may be installed.1Additional sizing information is not shown in an illustration and is given in text form only. No indication of correct harness height is given. The belt path is not labeled. No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. No instructions are given on the labels for the use of the tether. On the labels, the tether is shown but not labeled.5-ptGraco Nautilus Elite (FF)175469243153Combination2The restraint did not arrive fully assembled. A head hugger or body pillow covers the harness slots. The harness must be rethreaded to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 65lb / 27" - 52"4Additional sizing information is given in text only in the owner's manual. The user must read text to route the LATCH belt properly. The tether is not labeled in the illustrations showing modes of use. The owner's manual cannot be accessed while the restraint is installed in this mode.1Additional sizing information is not shown in an illustration and is given in text form only. No indication of correct harness height is given. The belt path is not labeled. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether. The tether is not labeled in the illustrations showing modes of use.5-ptGraco Nautilus Elite (FF)176142243154Combination2The restraint did not arrive fully assembled. The restraint did not arrive prepared for the smallest occupant. A head hugger or body pillow covers the harness slots. The harness must be rethreaded to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The belt positioning feature is simple to use, but the user may need to consult the owner's manual. The storage system for the lower LATCH 20lb - 65lb / 27" - 52"3Additional sizing information is given in text form. Names on the manual and labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.3Additional sizing information is given in text form. Belt path is not labeled. The 'no lap belt only' warning is not illustrated.High BackGraco Simpson Cargo (B)8487SMP42155Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Loose parts are generated while disassembling for cleaning.1Shoulder belt positioning device requires the use of two hands, but the action is simple. The shoulder belt positioning device does not allow the belt to move freely and can create slack in the belt, causing an improper fit.30lb - 100lb / 35" - 54"2Additional sizing information is given in text only. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Names on manual/on labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use. Tether information is separate from LATCH information. Does not tell user how to remove from storage.1No additional sizing information is given on the label. Tether is not labeled in illustrations. No indication of correct harness slot height is given. No illustration is given to show caregiver how to prepare LATCH. Labels do not remind caregiver to tighten LATCH belt. Labels do not show how to remove tether.5-ptGraco Simpson Cargo (FF)8487SMP42156Combination3The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / 27" - 43"3Warning that the rear seat is the safest place is buried in a bulleted list. Warning against using a lap belt only is not illustrated. Names on the manual and labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.3Additional sizing information may be missing. The 'no lap belt only' warning is not illustrated.High BackGraco Treasured Cargo (B)8686ROS41157Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Loose parts are generated while disassembling for cleaning.1Shoulder belt positioning device is difficult to use; the caregiver must read the instruction manual. The shoulder belt positioning device does not allow the belt to move freely and can create slack in the belt, causing an improper fit.30lb - 100lb / 35" - 54"2In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. No full picture exists of a properly restrained child in the child restraint in the owner's manual. Additional sizing information is given in text only in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The warning that indicates that the rear seat is the safest place for children is not illustrated in the owner's manual. The section describing vehicle seat belt types is incomplete and may be missing important information.1There may have been a label missing from the CRS. There is not a picture of a child properly restrained in the CRS on the labeling. No overview of the correct methods of installation is given. No indication of correct harness height is given. The belt path is not labeled. No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. The labels do not remind the caregiver to tighten the LATCH belt.5-ptSafety 1st Apex 65 (FF)22537-GMA42170Combination2The restraint did not arrive prepared for the smallest occupant. A head hugger or body pillow covers the harness slots. The harness must be rethread to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.2Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. No storage area exists for the LATCH attachments and/or the22lb - 65lb / 34" - 52"4The instruction manual is difficult to use while the child restraint is installed. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning against using the lap belt only is not given in the belt routing section of the manual.4Additional sizing information is not illustrated and is given in text form only on the labels. The 'no lap belt only' warning is not illustrated on the label.High Back/No BackChicco KeyFit Strada0007199943007054179Booster1The restraint did not arrive assembled. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced. Conversion from high-back to low-back may be difficult.533lb - 100lb / 38" - 57"3Instruction manual is difficult to find and/or use. Additional sizing information is given in text form. Warning that the rear seat is the safest place is buried in text. Illustration depicting child seated in restraint is separate from the text giving height/weight information.4Additional sizing information is given in text form. Belt path is labeled only on one side.No BackCombi Dakota88206554180Booster54Shoulder belt positioning device requires the use of two hands, but the action is simple.33lb - 100lb / 33" - 57"4Instruction manual is loose in the box when the restraint is removed. Additional sizing information is given in text form. No warning that the rear seat is the safest place for children 12 and under is given. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Additional sizing information is given in text form. The 'no lap belt only' warning is not illustrated. Illustration of child seated in restraint is separate from the text describing height/weight limits.High Back/No BackCombi Kobuk897054181Booster2Seat did not arrive assembled. No illustration is given on the labeling to demonstrate how to convert the booster from high-back to low-back modes.533lb - 100lb / 33" - 57"4The instruction manual was loose when the restraint was removed from its packaging. The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual.3Additional sizing information that describes a proper fit may be missing from the labels. The shoulder portion of the belt path is not labeled.High Back/No BackCombi Kobuk AirThru897054182Booster5533lb - 125lb / 33" - 57"4In the manual, additional text describing how the child should fit in the restraint is independent of an illustration showing a restrained child. The instruction manual is difficult to find and/or use while the child restraint is installed. There is no full picture of a properly-restrained child in the instruction manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.4On the labeling, the height and weight requirements are not directly next to an illustration of a child in the CRS. The 'no lap belt only' warning is not illustrated on the label.High BackCompass B505B505-TRB55183Booster5530lb - 100lb / 38" - 57"5Additional sizing information is given in text form. Warning that the rear seat is the safest place is buried in a bulleted list.5The 'no lap belt only' warning is not illustrated.High BackCompass B510B51055184Booster5530lb - 100lb / 38" - 57"2Instruction manual is loose in the box when the restraint is removed. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use. Illustration depicting child seated in restraint is separate from additional information.4Additional sizing information is given in text form. Belt path is not labeled.No BackCosco Ambassador22-293-BVL53185Booster2Seat did not arrive assembled.n/a30lb - 100lb / 34" - 57"4Instruction manual is loose in the box when the restraint is removed. Warning that the rear seat is the safest place is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Additional sizing information is given in text form. Belt path is not labeled.No BackCosco Highrise22-297-NNT53186Booster2Seat did not arrive assembled.n/a30lb - 100lb / 34" - 57"4The instruction manual is difficult to find and/or use while the child restraint is installed. There is no full picture of a properly-restrained child in the instruction manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning that the rear seat is the safest place for children is not illustrated clearly in the manual.4The belt path is not labeled.High Back/No BackCosco Pronto!22491-RTO54187Booster2The restraint did not arrive assembled. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode.530lb - 100lb / 34" - 57"3Instruction manual is difficult to find and/or use. Some additional sizing information is missing. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information may be missing. Belt path labeling is not contrasting.High Back/No BackCosco Protek22-291-WAL53188Booster1Tools are required for assembly. Hand tools may be required to disassemble the restraint for cleaning.530lb - 100lb / 34" - 57"5Warning that the rear seat is the safest place is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Belt path is not labeled.High BackCosco Traveler22-270-CBA54189Booster2Seat did not arrive assembled.530lb - 80lb / 34" - 52"4No full picture exists of a properly restrained child in the restraint directly next to sizing information in the owner's manual. The warning that the rear seat is the safest for children is located within text and is not prominently displayed.4No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. The caregiver may need to consult the manual to properly route the seat belt.5-ptSafety 1st Go Hybrid Booster (FF)22256-AHD44172Combination4No illustration is given on the labels to depict conversion to the forward-facing mode from any other mode. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Hand tools are required to disassemble the seat for cleaning.5The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage area is not clearly labeled.22lb - 65lb / 34" - 52"5The instruction manual is difficult to reach/store while the child restraint is installed.4The belt path is not labeled.High BackSafety 1st Go Hybrid Booster (B)22256-AHD44171Combination1No illustration is given on the label to show conversion to booster mode from any other mode. Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.n/a40lb - 100lb / 43" - 57"2Instruction manual is difficult to find and/or use. There is no full picture of a properly restrained child located next to the text describing height/weight requirements. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information is given in text form. Belt path is not labeled.High BackSafety 1st Summit (B)22-565-WAL43173Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.540lb - 100lb / 43" - 52"1Instruction manual was hard to find when the seat was removed from the box. Instruction manual storage is difficult to find and/or use. Illustration depicting a child properly seated in the restraint is separate from height/weight limits. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not remind caregiver to tighten LATCH belt. No instructions are given for the use of the tether.5-ptSafety 1st Summit (FF)22-565-WAL42174Combination4The harness clip is not labeled with placement instructions. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.2Tether adjustment requires two hands. Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"3Instruction manual is difficult to find and/or use. There is no full picture of a properly restrained child. No additional sizing information is given. Warning that the rear seat is the safest place is buried in a bulleted list.3Additional sizing information is given in text form. Belt path is not labeled.High BackSafety 1st Surveyor (B)22-567-GRH44175Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.540lb - 100lb / 43" - 57"4Instruction manual storage is difficult to find and/or use. No additional sizing information is given. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list.1No additional sizing information is given on the label. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. User must read manual to install LATCH.5-ptSafety 1st Surveyor (FF)22-567-GRH43176Combination3The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"5Warning against using a lap belt only is not illustrated. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No overview of modes is provided. There is no warning against using a lap belt only. Illustration of child seated in the restraint is separate from the text giving height and weight information.High Back/No BackBritax MonarchE9053E953177Booster2Seat did not arrive assembled. No illustration is given in the labeling to demonstrate how to convert the booster from high-back to low-back modes.530lb - 100lb / 38" - 60"4The owner's manual is difficult to locate when the restraint is taken out of its packaging. The instruction manual is difficult to find and/or use while the child restraint is installed. The warning against using a lap belt only is not illustrated in the manual.3No picture of a properly-restrained child is provided on the labeling. Additional sizing information is not illustrated and is given in text form only on the labels. The 'no lap belt only' warning is not illustrated on the label.High Back/No BackBritax Parkway SGE9LA86953178Booster1The restraint did not arrive assembled. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.4The shoulder belt may slide out of the shoulder belt positioning device.40lb - 120lb / 38" - 63"3Additional sizing information is given in text only in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route the LATCH belt properly. The tether is not labeled in the illustrations showing modes of use. The owner's manual cannot be accessed when the restraint is installed in this mode.1No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether. The tether is not labeled in the illustrations showing modes of use.5-ptEvenflo Generations 65 (FF)376198143144Combination2The restraint did not arrive prepared for the smallest occupant. The harness must be rethreaded to adjust height for the child's growth. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced. The harness must be replaced to convert to the forward-facing mode from booster mode.4The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 65lb / 29" - 50"54There is no explicit warning against using a lap belt only on the label.High BackEvenflo Maestro (B)3101105944145Combination1The harness must be removed to convert this restraint to booster mode. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.540lb - 100lb / 44" - 57"5The section describing vehicle seat belt types is incomplete and may be missing important information. The manual does not differentiate between lap and lap-shoulder belt in the installation section.3Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether. The tether is not labeled in the illustrations showing modes of use.5-ptEvenflo Maestro (FF)3101105944146Combination3A head hugger or body pillow covers the harness slots. The harness must be rethreaded to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning.5The child restraint is equipped with push-button LATCH connectors. The storage systems for LATCH and the tether hook may be overlooked.20lb - 50lb / 29" - 50"4The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.4Additional sizing information is not illustrated and is given in text form only on the labels. The 'no lap belt only' warning is not illustrated on the label.High BackGraco Cargo (B)175333444147Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.530lb -100lb / 35" - 54"5The manual does not have a dedicated storage compartment or it hangs on a string. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to prepare and route LATCH belt correctly.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptSunshine Kids Radian 65 (RF)1650022103Convertible2The restraint was not set for the smallest possible occupant. Harness slots in the pad and in the shell are misaligned or small. The harness must be rethread for child's growth. There are no pictures on the labels to describe how to convert this restraint to rear-facing mode. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. No angle feedback device is present. There are not three levels of built5lb - 35lb / up to 53"1In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual is stored on a string. Additional sizing information is given in text only in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The warning that indicates that the rear seat is the safest place for children is not illustrated in the owner's manual. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route seatbelt properly. The user must read text to route the LATCH belt properly. Heights/weights in the manual and on the labels do not match.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptSunshine Kids Radian 80 (FF)US1850022104Convertible3The padding and the shell may be misaligned, causing difficulty in threading the shoulder portions of the harness. The harness must be rethread to adjust height for the child's growth. No illustration is given on the labels to depict conversion to the forward-facing mode from any other mode. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The child restraint is equipped with push-button LATCH connectors.22lb - 80lb / up to 53"4The manual does not have a dedicated storage compartment or it hangs on a string. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to prepare and route LATCH belt correctly.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptSunshine Kids Radian 80 (RF)US1850022105Convertible2The restraint did not arrive fully assembled. The restraint was not set for the smallest possible occupant. There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethread for child's growth. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. No angle feedback device is present. There are not three levels of built5lb - 35lb / up to 53"3The user may need to read the written instructions to prepare and use the LATCH/tether. In the instructions, the tether is shown but not labeled with each mode of installation. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The warning that indicates that the rear seat is the safest place for children is not illustrated in the owner's manual. The section describing vehicle seat belt types is incomplete and may be missing important information.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether.5-ptSunshine Kids Radian XT (FF)1950023106Convertible3A head hugger or body pillow covers the harness slots. The harness must be rethread to adjust height for the child's growth. No illustration is given on the labels to depict conversion to the forward-facing mode from any other mode. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The child restraint is equipped with push-button LATCH connectors.20lb - 80lb / up to 53"5The caregiver must read text to correctly prepare and route the LATCH belt.4Labels do not clearly depict LATCH preparation. Labels do not remind caregiver to tighten LATCH.5-ptThe First Years True Fit (RF)C630-SBL24109Convertible4The harness clip is not labeled to indicate proper placement. Multiple actions are required to convert the seat to the rear-facing mode from other modes; these must be carefully followed in the manual.4A line is printed or molded on the CRS that must be level with the ground when the restraint is installed. There are not three levels of built-in recline available. Push-button-style connectors are used for LATCH that do not require twisting to remove f5lb - 35lb / head 1" below top of restraint5The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The warning that indicates that the rear seat is the safest place for children is not illustrated in the owner's manual.55-ptThe First Years True Fit Premier (FF)C670-BAR25110Convertible5Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions.4The user must lift the restraint's padding to route the belt. The child restraint is equipped with push-button LATCH connectors.23lb - 65lb / up to 50"555-ptThe First Years True Fit Premier (RF)C670-BAR25111Convertible5Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual.3The user must lift the padding to route the seat belt. There are not three levels of built-in recline available. Push-button-style connectors are used as LATCH attachments.5lb - 35lb / head 1" below top of restraint5The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The manual cannot be accessed when the restraint is installed in this mode.5The tether is not labeled in the illustrations showing modes of use.5-ptThe First Years True Fit Recline (FF)C650-URL25112Convertible5Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions.5The child restraint is equipped with push-button LATCH connectors.23lb - 65lb / up to 50"555-ptThe First Years True Fit Recline (RF)C650-URL25113Convertible5Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual.3It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. There are not three levels of built-in recline available. Push-button-style connectors are used as LATCH attachments.5lb - 35lb / head 1" below top of restraint1Instruction manual storage is difficult to find and/or use. No additional sizing information is given. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to route seatbelt. Caregiver must read text to route LATCH. Names on manual/on labels do not match.1No additional sizing information is given on the label. Tether is not labeled in illustrations. Additional harness slot height adjustment instructions are given in text only. Belt path is not labeled. Labels do not remind caregiver to tighten LATCH or tether.5-ptTriple Play Sit N Stroll (FF)400122114Convertible3The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Loose parts are generated when disassembling for cleaning.5Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / 18" - 40"1Manual storage is difficult to find and use. Additional sizing information is in text only. Methods of installation are not labeled. Airbag warning is not illustrated. User must read text to route seatbelts. User must read text to prepare and route LATCH belt.2No additional sizing information given to achieve a proper fit. Additional harness slot height adjustment guidance is in text only. Belt routing path is not labeled. Labels do not remind user to tighten LATCH.5-ptTriple Play Sit 'N' Stroll (RF)400122115Convertible2Seat was not set for smallest passenger. Harness clip is not labeled. Harness system is difficult to reach and adjust. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Loose parts exist when disassembling for cleaning.4No angle feedback device is present. Push-button-style connectors are available for LATCH. No label to denote LATCH storage.5lb - 30lb / 18" - 40"1Instruction manual was hard to find when the seat was removed from the box. Instruction manual is stored on a string. No full picture exists of a properly restrained child in the child restraint. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Instruction manual was hard to find when the seat was removed from the box. Caregiver must read text to route LATCH.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is not labeled. No illustration is given to show caregiver how to prepare LATCH. Labels do not remind caregiver to tighten LATCH belt. No instructions are given for the use of the tether.5-ptBritax RegentE9W399032116Forward Facing3Seat did not come assembled. The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. The harness must be taken out and rethread to disassemble the seat for cleaning.3Interference is possible between a seat component and the seat belt/LATCH belt. Lower attachments disconnect via push-button connectors. No storage system exists for LATCH/tether.22lb - 80lb / up to 53"5The tether is shown but not labeled in the manual.1The tether is shown but not labeled in the pictograms on the seat. The labels are not applied smoothly and are therefore difficult to read.No additional sizing information is given on the label. The belt path is not labeled. Labels do not explain the use of LATCH. The labels do not remind the caregiver to tighten the LATCH belt. Labels do not show how to remove the tether. The caregiver must read text to properly use the tether. No instructions are given on the labels for the use of the tether.5-ptGraco CozyCline175192933117Forward Facing3The harness clip is not labeled with placement instructions. A head hugger or body pillow covers the harness slots. The harness must be rethread to adjust height for the child's growth. The harness must be taken out and rethreaded to disassemble the seat for cleaning.4The user must refer to the manual to use the lock-off. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 40lb / up to 43"5All methods of installation are not labeled.3Tether is not labeled in illustrations. LATCH illustrations are unclear. Caregiver must read text to complete tether installation.5-ptSafeGuard Child SeatF1756035118Forward Facing5Loose parts are generated when disassembling for cleaning.522lb - 65lb / up to 57"3Instruction manual is difficult to find and/or use. There is no full picture of a properly restrained child. No additional sizing information is given. Warning that the rear seat is the safest place is buried in a bulleted list.3Additional sizing information is given in text form. Belt path is not labeled.High BackAlpha Sport Vantage (B)22-547-CHA44119Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.540lb - 100lb / 43" - 52"3Instruction manual was loose in the box when the restraint was removed. Instruction manual storage is difficult to find and/or use. Additional sizing information is given in text only. Warning that the safest place is the rear seat is buried in a bulleted list. Tether use is not labeled in every configuration in which it may be used in the overview of all available methods.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not explain the use of LATCH.5-ptAlpha Sport Vantage (FF)22-547-CHA43120Combination3The harness clip is not labeled with placement instructions. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"4Warning that the safest place is the rear seat is buried in a bulleted list. Does not remind user to tighten LATCH or tether. Names on manual/on labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.2No additional sizing information is given on the label. Tether is not labeled in illustrations. Labels do not explain the use of LATCH. No instructions are given for the use of the tether.5-ptGraco Treasured Cargo (FF)8686ROS42158Combination1The harness clip is not labeled with placement instructions. The caregiver cannot access the harness adjustment system when the restraint is installed. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethread to disassemble the seat for cleaning. The restraint was not ready to use when removed from packaging.4Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / 27" - 43"3Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.3Additional sizing information may be missing. The 'no lap belt only' warning is not illustrated.High BackGraco Ultra Cargo (B)8487WBR42159Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Loose parts are generated while disassembling for cleaning.1Shoulder belt positioning device is difficult to use; the caregiver must read the instruction manual. The shoulder belt positioning device does not allow the belt to move freely and can create slack in the belt, causing an improper fit.30lb - 100lb / 35" - 54"4Warning that the safest place is the rear seat is buried in a bulleted list. Names on manual/on labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not explain the use of LATCH. No instructions are given for the use of the tether. Additional sizing information is given in text form.5-ptGraco Ultra Cargo (FF)8487WBR42160Combination2The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. LATCH/Tether storage system is not sufficiently labeled.20lb - 40lb / 27" - 43"5The child restraint is not pictured on a rear vehicle seat in the manual.5High BackKidsEmbrace Dale Jr. (B)65500DEJ44161Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.4The shoulder belt may slip out of the shoulder belt positioning device.30lb - 100lb / 38" - 57"5The section describing vehicle seat belt types is incomplete and may be missing important information. Methods of installation are not broken down by seat belt type in the manual.5The labels do not remind the caregiver to tighten the LATCH belt.5-ptKidsEmbrace Dale Jr. (FF)65500DEJ44162Combination2The restraint did not arrive fully assembled. The harness clip is not labeled with placement instructions. The child restraint has less than three harness adjustment heights. The harness must be rethreaded to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.5The child restraint is equipped with push-button LATCH connectors.22lb - 65lb / 29" - 52"3There is no full picture of a properly-restrained child directly next to sizing information in the instruction manual. Methods of installation are not labeled in an obvious way in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning against using a lap belt only is not illustrated in the manual.1Additional sizing information that describes a proper fit may be missing from the labels; weight information is incomplete. Child restraint is not pictured on a rear vehicle seat in the labels. The belt path is not labeled. There is no explicit warning against using a lap belt only on the label.High BackRecaro ProSport (B)50026744541163Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Hand tools may be required to disassemble the restraint for cleaning.4The shoulder belt may slip out of the shoulder belt positioning device.30lb - 120lb / 37" - 59"53Harness slots are not labeled to indicate which may be used in the rear-facing mode and which may be used in the forward-facing mode. There is no picture of a child in the child restraint.5-ptDorel Alpha Omega Elite (RF)22149-PAL632343-in-13The restraint was not set for the smallest possible occupant. The harness is difficult to adjust for child's growth. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / 19" - 36"5The instruction manual is difficult to find and/or use while the child restraint is installed.4The belt path is not labeled.High BackEddie Bauer Deluxe 3-in-1 (B)22790-WPR642353-in-11Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.540lb - 100lb / 43" - 52"4In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list.5Harness slots are not labeled to indicate which may be used in the rear-facing mode and which may be used in the forward-facing mode.5-ptEddie Bauer Deluxe 3-in-1 (FF)22790-WPR642363-in-14Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clearly labeled.22lb - 50lb / 34" - 45"53Harness slots are not labeled to indicate which may be used in the rear-facing mode and which may be used in the forward-facing mode. There is no picture of a child in the child restraint. Labels were already peeling when the restraint was removed from the box.5-ptEddie Bauer Deluxe 3-in-1 (RF)22790-WPR632373-in-13The restraint was not set for the smallest possible occupant. The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. The restraint is equipped with hook-style LATCH attachments which may req5lb - 35lb / 19" - 36"2Instruction manual is difficult to find and/or use. Some additional sizing information is not given in the manual. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information is given in text form. Belt path is not labeled.High BackEddie Bauer Deluxe Convertible (B)22-741-WNW632383-in-12Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.4The shoulder belt may fall out of the shoulder belt positioning device.40lb - 80lb / 43" - 52"1Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. No additional sizing information is given. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to route LATCH. Names on manual/on labels do not match.1Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation. The size information on the labeling is in text only.5-ptEddie Bauer Deluxe Convertible (FF)22-741-WNW622393-in-12The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"1Manual was loose in the box. Manual storage is difficult to find and use. Some additional sizing information is not provided. Airbag warning is buried in a bulleted list. User must read text to prepare and route LATCH belt. Names in manual and on seat do not match.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Belt routing path is only labeled on one side. Labels do not remind user to tighten LATCH.5-ptEddie Bauer Deluxe Convertible (RF)22-741-WNW612403-in-13Harness clip is not labeled. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1May be uncomfortable for larger hands to route the belt through the path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the CRS that must be leveled to the ground. There are not three5lb - 35lb / 19" - 36"5The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.5Additional sizing information is not illustrated and is given in text form only on the labels.No BackEvenflo Big Kid Amp340191555195Booster54The shoulder belt positioning device requires the use of two hands, but the action is simple.40lb - 100lb / 40" - 57"3Warning that the rear seat is the safest place is buried in a bulleted list. Warning against using the lap belt only is not given in the belt routing section of the manual. Heights/weights in the manual and on the labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Additional sizing information is given in text form. Modes are not labeled.High Back/No BackEvenflo Confidence313173753196Booster1Seat did not arrive assembled. Hand tools may be required to disassemble the restraint for cleaning. Loose parts are generated while disassembling for cleaning.530lb - 100lb / up to 57"5Warning that the rear seat is the safest place is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.5High BackEvenflo Sightseer269219855197Booster2Seat did not arrive assembled.530lb - 100lb / 37" - 54"5Additional sizing information is given in text form. Warning that the rear seat is the safest place is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Belt path is not labeled. The 'no lap belt only' warning is not illustrated.High Back/No BackGraco AirBooster8G00SRM54198Booster2Seat did not arrive assembled. No illustration is given to demonstrate how to convert the booster from high-back to low-back modes.530lb - 100lb / 38" - 57"4The instruction manual was loose when the restraint was removed from its packaging. The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual.3Additional sizing information is not illustrated and is given in text form only on the labels. The belt path is not labeled. The 'no lap belt only' warning is not illustrated on the label.High Back/No BackGraco TurboBooster (High-Back/No Back)175195353199Booster2The restraint did not arrive assembled. Tools are required for assembly. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode.530lb - 100lb / 38" - 57"5The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.3Additional sizing information is not illustrated and is given in text form only on the labels. The belt path is not labeled. The 'no lap belt only' warning is not illustrated on the label.No BackGraco TurboBooster (No Back)175195454200Booster2The restraint did not arrive assembled. Tools are required for assembly.4The shoulder belt positioning device requires the use of two hands, but the action is simple.40lb - 100lb / 40" - 57"4There is a storage location for the manual, but it is located on the highback portion of the seat. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning against using the lap belt only is not given in the belt routing section of the manual.3Additional sizing information is not illustrated and is given in text form only on the labels. No overview of methods of installation is provided on the labels. The 'no lap belt only' warning is not illustrated on the label.High Back/No BackHarmony Baby Armor0304001RDN52201Booster1The restraint did not arrive assembled. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.1The shoulder belt positioning device requires the use of two hands, but the action is simple. The shoulder belt may slide out of the shoulder belt positioning device. The shoulder belt positioning device does not allow the belt to move freely and can cr30lb - 110lb / 34" - 57"3The caregiver must read text to route the seat belt properly. The warning against using the lap belt only is not given in the belt routing section of the manual. Manual is intended to be attached when the restraint is taken out of the box, but it may have inadvertently detached during shipping. No owner's manual storage is available when using the restraint in low back mode.1No overview of methods of installation is provided on the labels. The belt path labeling is not contrasting. The 'no lap belt only' warning is not illustrated on the label. A picture of a properly restrained child in this mode is located separate from sizing information on the labeling.High Back/No BackHarmony Dreamtime Comfort Booster0303002PSK52202Booster1The restraint did not arrive assembled. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode.1The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple. The shoulder belt may slip out of the shoulder belt positioning device. The shoulder belt positioning device may not allow the belt to move free30lb - 110lb / 34" - 57"3The instruction manual is difficult to find and/or use while the child restraint is installed. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning against using the lap belt only is not given in the belt routing section of the manual. Heights/weights in the manual and on the labels do not match.1On the labeling, the illustration showing how to use the restraint is the same color as the shell and can be difficult to see. No picture of a properly-restrained child is provided on the labeling. The 'no lap belt only' warning is not illustrated on the label.No BackHarmony LiteRider0304003GSD53203Booster54The shoulder belt positioning device requires the use of two hands, but the action is simple.30lb -100lb / 34" - 57"3The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning against using the lap belt only is not given in the belt routing section of the manual.1No picture of a properly-restrained child is provided on the labeling. Additional sizing information is not illustrated and is given in text form only on the labels. Child restraint is not pictured on a rear vehicle seat in the labels. The belt path is not labeled. The 'no lap belt only' warning is not illustrated on the label.High BackEvenflo Symphony (B)3121925632413-in-12No illustration is given on the label to show conversion to booster mode from any other mode. Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.530lb - 100lb / up to 57"3In the manual, additional sizing information is given in text only. The instruction manual storage is difficult to find and/or use while the child restraint is installed. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route the LATCH belt properly.1Belt path labeling is not directly next to its corresponding path. There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information is not shown in an illustration and is given in text form only. Labels do not explain the use of LATCH. No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use. The labels do not remind the caregiver to tighten the LATCH belt. No instructions are given on the labels for the use of the tether.5-ptEvenflo Symphony (FF)3121925632423-in-14The harness clip is not labeled with placement instructions. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions.2The belt path may not comfortably accommodate a larger hand. Interference is possible between a seat component and the seat belt/LATCH belt. The child restraint is equipped with push-button LATCH connectors. The LATCH attachment and/or tether storage a20lb - 40lb / up to 50"4The owner's manual was difficult to locate when the restraint was taken out of its packaging. The instruction manual is difficult to find and/or use while the child restraint is installed.4The belt path is not labeled.High BackCybex Solution X-Fix5002002054190Booster2The restraint did not arrive fully assembled for proper use.533lb - 100lb / 38" - 60"2There is no full picture of a properly restrained child. Warning that the rear seat is the safest place is buried in a bulleted list. Heights/weights in the manual and on the labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use. Does not explicitly warn against using a lap-only belt.1Height/weight information is not located directly next to illustration of child seated properly in the restraint. Restraint is not pictured in a vehicle seat. Does not explicitly warn against using a lap-only belt.High BackRecaro Start50011797553212Booster54Shoulder belt positioning device requires the use of two hands, but the action is simple.30lb - 80lb / up to 59"2Instruction manual is stored on a string. All of the different methods of installation are not labeled. Child restraint is not illustrated on a vehicle seat. Warning that the rear seat is the safest place is buried in a bulleted list. Heights/weights in the manual and on the labels do not match.4High BackRecaro Vivo940000080753213Booster1Seat did not arrive assembled. Loose parts are generated while disassembling for cleaning.530lb - 100lb / 37" - 59"2Instruction manual is difficult to find and/or use. All of the different methods of installation are not labeled. Warning that the rear seat is the safest place is buried in a bulleted list. Heights/weights in the manual and on the labels do not match.4High BackRecaro Vivo Lite820000000953214Booster1Seat did not arrive assembled. Loose parts are generated while disassembling for cleaning.530lb - 100lb / 37" - 59"5Warning that the rear seat is the safest place is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Belt path is not labeled.No BackEddie Bauer Auto Booster (High Back/No Back)22-888-SDU55191Booster4No illustration is given to demonstrate how to convert the booster from high-back to low-back modes.530lb - 100lb / 34" - 57"5Warning that the rear seat is the safest place is buried in a bulleted list. No warning that the rear seat is the safest place for children 12 and under is given. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Belt path is not labeled.No BackEddie Bauer Auto Booster (No Back)22-828-SON55192Booster5n/a40lb - 100lb / 43" - 57"2Instruction manual is loose in the box when the restraint is removed. Additional sizing information is given in text form. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.5Additional sizing information is given in text form.High Back/No BackEvenflo Big Kid (High Back/Low Back)337175154193Booster4No illustration is given on the label to show conversion from another mode to this one.530lb - 100lb / up to 57"5Warning that the rear seat is the safest place is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.5No BackEvenflo Big Kid (No Back)2791615L255194Booster54Shoulder belt positioning device requires the use of two hands, but the action is simple.40lb - 100lb / up to 57"3The instruction manual was attached to the restraint but was difficult to find when the restraint was removed from its packaging. No full picture exists of a properly restrained child in the restraint directly next to sizing information in the owner's manual. No additional sizing information is given in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The tether is not labeled in the illustrations showing modes of use.1There is not a picture of a child properly restrained in the CRS directly next to sizing information on the labeling. The child restraint is not shown in a rear vehicle seat. Additional harness height adjustment instructions are given in text only. The belt path is not labeled. Labels do not explain the use of LATCH. No instructions are given on the labels for the use of the tether. The tether is not labeled in the illustrations showing modes of use.5-ptRecaro ProSport (FF)50026744543164Combination3The harness clip is not labeled with placement instructions. The harness must be rethreaded to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The child restraint is equipped with push-button LATCH connectors. No storage area exists for the LATCH attachments and/or the tether.20lb - 90lb / 27" - 50"1Instruction manual is difficult to find and/or use. Warning that the rear seat is the safest place is buried in a bulleted list. Warning against using a lap belt only is not illustrated. Heights/weights in the manual and on the labels do not match. Sizing information is located separately from an illustration of a properly restrained child.1Additional sizing information may be missing. Child restraint is not pictured on a vehicle seat. Does not explicitly warn against using a lap-only belt.High BackRecaro Young Sport (B)50013136442165Combination2Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.530lb - 80lb / 37" - 59"1Instruction manual was hard to find when the seat was removed from the box. Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. Additional sizing information is given in text only. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Some information in the manual describing how to determine vehicle seat belt type is not included in the manual.1No picture of child properly restrained in seat. Tether is not labeled in illustrations. Additional harness slot height adjustment instructions are given in text only. No illustration is given to show caregiver how to prepare LATCH. Labels do not remind caregiver to tighten LATCH belt. No instructions are given for the use of the tether.5-ptRecaro Young Sport (FF)5000013136442166Combination3The harness clip is not labeled with placement instructions. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethread to disassemble the seat for cleaning.4Lower attachments disconnect via push-button connectors. No storage system exists for tether.20lb - 40lb / 27" - 40"4No additional sizing information is given. Warning that the rear seat is the safest place is buried in a bulleted list. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Additional sizing information may be missing.High BackSafeguard Go (B)F10186043167Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Loose parts are generated while disassembling for cleaning.3Shoulder belt positioning device is difficult to use; the caregiver must read the instruction manual.40lb - 100lb / 43" - 57"5Warning that the safest place is the rear seat is buried in a bulleted list.3Additional sizing information may be missing from the label. Labels do not explain the use of LATCH. No instructions are given for the use of the tether.5-ptSafeGuard Go (FF)F10186044168Combination4Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.5Lower attachments disconnect via push-button connectors. LATCH/Tether storage system is not sufficiently labeled.22lb - 60lb / 31" - 52"4The instruction manual is difficult to find and/or use while the child restraint is installed. There is no full picture of a properly-restrained child in the instruction manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.3Additional sizing information is not illustrated and is given in text form only on the labels. The belt path is not labeled.High BackSafety 1st Apex 65 (B)22537-GMA43169Combination1To convert this child restraint to this mode of use from any other mode of use, the user must perform complicated steps. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.4The shoulder belt may slide out of the shoulder belt positioning device.40lb - 100lb / 43" - 57"3In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text only in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The user must read text to route the LATCH belt properly.1On the labels, the tether is shown but not labeled with each mode of installation.Additional sizing information is not shown in an illustration and is given in text form only. No indication of correct harness height is given. The labels do not remind the caregiver to tighten the LATCH belt. No instructions are given on the labels for the use of the tether.5-ptGraco Cargo (FF)175333443148Combination2The restraint was not set up for the youngest occupant when it was removed from its packaging. The harness clip is not labeled with placement instructions. The harness must be rethread to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.4The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clearly labeled.20lb - 40lb / 27" - 43"4Additional sizing information is given in text form. Warning that the rear seat is the safest place is buried in a bulleted list. The manual cannot be accessed when the restraint is installed in the seat.5The 'no lap belt only' warning is not illustrated in the labeling.High Back/No BackGraco Nautilus (B)8J00BRV44149Combination1No illustration is given on the restraint itself to demonstrate how to convert the booster from high-back mode to low-back mode. Loose parts are generated while disassembling for cleaning.530lb - 100lb / 38" - 57"4Warning that the rear seat is the safest place for children is buried in a bulleted list of other warnings. The caregiver must read text to correctly prepare and route the LATCH belt.1No additional sizing information is given to help caregivers achieve a proper fit. Belt routing path labeling is not contrasting. Belt routing path is not labeled. Labels do not clearly depict LATCH preparation. Labels do not remind caregiver to tighten LATCH belt. Labels do not show the caregiver how to remove tether from its storage. The caregiver must read text written on the labels to complete tether installation correctly. No instructions are given for the use of the tether on the restraint itself; the caregiver must refer to the restraint owner's manual to properly install the tether.5-ptGraco Nautilus (FF)8J00BRV43150Combination2The restraint was not fully assembled when it was removed from its packaging. There is a head hugger, body pillow, or some other additional feature blocking the harness slots from being readily visible. The harness must be rethread to accommodate the child's growth. Multiple actions are required to convert the seat to the forward-facing mode from other modes; these must be carefully followed in the manual. The harness system must be rethread when reassembling after cleaning. Loose parts exist when disassembling for cleaning.4Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No label is posted on the restraint to denote LATCH storage.20lb - 65lb / 27" - 52"5Additional sizing information is given in text form in the manual.3The belt path is not labeled. The 'no lap belt only' warning is not illustrated on the label.High Back/No BackGraco Nautilus Elite (B)175469243151Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. No illustration is given on the labeling to demonstrate how to convert the restraint from high-back mode to low-back mode. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.530lb - 100lb / 38" - 57"5Additional sizing information is given in text form in the manual. The owner's manual cannot be accessed when the restraint is installed in this mode.5The 'no lap belt only' warning is not illustrated on the label.High Back/No BackGraco Nautilus Elite (B)176142244152Combination1Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.530lb - 100lb / 38" - 57"1Instruction manual storage is difficult to find and/or use. No full picture exists of a properly restrained child in the child restraint. No additional sizing information is given. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Caregiver must read text to route LATCH. Names on manual/on labels do not match.1There is not a picture of a child properly restrained in the CRS on the labeling. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Belt path is labeled on one side only. Labels do not remind caregiver to tighten LATCH belt. Caregiver must read text to complete tether installation.5-ptAlpha Sport 3 Phase (FF)22-458-NYC622273-in-12The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"1Manual was loose in the box. Manual storage is difficult to find and use. Additional sizing information is in text only. Airbag warning is buried in a bulleted list. Names in manual and on seat do not match.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information. Belt routing path is not labeled. Labels do not remind user to tighten LATCH.5-ptAlpha Sport 3 Phase (RF)22-458-NYC612283-in-13Harness clip is not labeled. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1May be uncomfortable for larger hands to route the belt through the path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the CRS that must be leveled to the ground. There are not three5lb - 35lb / 19" - 36"2In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. No full picture exists of a properly restrained child in the child restraint in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH.5-ptDorel Alpha Omega All in One (FF)22469-BSE622293-in-13The harness height may be difficult to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.2Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. No storage area exists for the LATCH attachments and/or the22lb - 50lb / 34" - 85"3The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual storage is difficult to find and use. In the manual, there is no illustration of the child in the restraint. Additional sizing information is given in text only in the manual. The restraint is not pictured in a rear vehicle seat in the manual. The frontal airbag warning is contained in a bulleted list and is not separated from other warnings.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptDorel Alpha Omega All in One (RF)22469-BSE622303-in-14The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / 19" - 36"3The instruction manual is difficult to find and/or use while the child restraint is installed. There is no full picture of a properly-restrained child in the instruction manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.3No picture of a properly-restrained child is provided on the labeling. Additional sizing information that describes a proper fit may be missing from the labels. The belt path is not labeled.High BackDorel Alpha Omega All-in-One (B)22469-BSE632313-in-11No illustration is given on the label to show conversion to booster mode from any other mode. Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.540lb - 80lb / 43" - 52"3The instruction manual is difficult to find and/or use while the child restraint is installed. No additional sizing information is given in the manual.4The belt path is not labeled.High BackDorel Alpha Omega Elite (B)22149-PAL632323-in-11Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.540lb - 100lb / 43" - 52"3In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed.5Harness slots are not labeled to indicate which may be used in the rear-facing mode and which may be used in the forward-facing mode.5-ptDorel Alpha Omega Elite (FF)22149-PAL632333-in-13The harness height may be difficult to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.2Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. No storage area exists for the LATCH attachments and/or the22lb - 50lb / 34" - 45"3The manual storage is difficult to find and use. In the manual, there is no illustration of the child in the restraint directly next to sizing information. Additional sizing information is not provided in the manual. The frontal airbag warning is contained in a bulleted list and is not separated from other warnings. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to prepare and route LATCH belt correctly. The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.1There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. Additional harness slot height adjustment guidance is in text only. Labels do not remind the user to tighten LATCH. Labels were already peeling when the restraint was removed from the box. The belt path labeling is not located near the belt path.5-ptSafety 1st Intera (RF)22-461-BGG622523-in-13The harness clip is not labeled to indicate its correct placement. There is a head hugger or body pillow blocking the harness slots from being easily visible. The harness must be rethreaded for child's growth. When adjusting the harness height, mandatory pieces to the CRS must be removed and could be misplaced. The harness must be rethreaded when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / 19" - 36"3Airbag warning is buried in a bulleted list. Names in manual and on seat do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.4There is not a picture of a child properly restrained in the CRS on the labeling.3-ptAngelGuard AngelRideAA2403FOF75253Car Bed55up to 9lb / up to 20"5The frontal airbag warning is buried within text and is not prominently displayed separate from other warnings. In the manual, the section which details vehicle seat belt types does not provide complete information. The user must read text to route seatbelts correctly. The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.3Sizing information is not directly next to the illustration on the label. There is no chest harness clip in the illustration on the label. Labels do not explain the use of LATCH. Labels were already peeling when the restraint was removed from the box.5-ptEvenflo Symphony (RF)3121925632433-in-13The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. There are no pictures on the labels to describe how to convert this restraint to rear-facing mode. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing path. There are not three levels of built-in recline available. Push-button-styl5lb - 35lb / 19" - head 1" below top of restraint2The instruction manual is difficult to find and/or use while the child restraint is installed. There is no full picture of a properly-restrained child in the instruction manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. Names on the manual and in labels do not match.3No picture of a properly-restrained child is provided on the labeling. Additional sizing information that describes a proper fit may be missing from the labels. The belt path is not labeled.High BackSafety 1st All in One (B)22178-STL622443-in-11No illustration is given on the label to show conversion to booster mode from any other mode. Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.540lb - 80lb / 43" - 52"1In the instructions, the tether is shown but not labeled with each mode of installation. The instruction manual storage is difficult to find and/or use while the child restraint is installed. No full picture exists of a properly restrained child in the child restraint in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information. The model names in the manual and on the labels do not match.1On the labels, the tether is shown but not labeled with each mode of installation. There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given on the label. No indication of correct harness height is given. Labels do not explain the use of LATCH.5-ptSafety 1st All in One (FF)22178-STL622453-in-13The harness height may be difficult to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.2Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. No storage area exists for the LATCH attachments and/or the22lb - 50lb / 34" - 85"2The manual was attached to the restraint in a hard-to-find location when the restraint was removed from its packaging. The manual storage is difficult to find and use. In the manual, there is no illustration of the child in the restraint. Additional sizing information is given in text only in the manual. The frontal airbag warning is contained in a bulleted list and is not separated from other warnings. In the manual, the section which details vehicle seat belt types does not provide complete information.2There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information is given. No additional harness slot height adjustment information is given. Labels do not explain the use of LATCH.5-ptSafety 1st All in One (RF)22178-STL622463-in-14The harness must be rethread when reassembling after cleaning. Multiple actions are required to convert the seat to the rear-facing mode; these must be followed in the manual. The harness must be rethread when reassembling after cleaning. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / 19" - 36"5The instruction manual is difficult to find and/or use while the child restraint is installed. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.1No picture of a properly-restrained child is provided next to sizing information on the labeling. Additional sizing information that describes a proper fit may be missing from the labels. Child restraint is not pictured on a rear vehicle seat in the labels. No overview of methods of installation is provided on the labels. There is no explicit warning against using a lap belt only on the label.High BackHarmony Olympian Youth Booster Seat0304005TCH52204Booster3While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.1The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple. The shoulder belt positioning device may not allow the belt to move freely and can create slack in the belt.30lb - 110lb / 34" - 57"3No additional sizing information is given. Warning that the rear seat is the safest place is buried in text. Warning against using the lap belt only is not given in the belt routing section of the manual. Manual storage cannot be accessed when the CRS is installed in this mode of use.1No picture of a properly restrained child is provided. Additional sizing information may be missing. Belt path is not labeled. There is no warning against using a lap belt only.High BackJane Indy PlusINDY454354205Booster5530lb - 80lb / up to 57"4Instruction manual is loose in the box when the restraint is removed. Additional sizing information is given in text form. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Additional sizing information is given in text form. Belt path labeling is not contrasting.No BackMagna Clek OlliOlli54206Booster3Loose parts are generated while disassembling for cleaning.n/a40lb - 100lb / 40" - 57"4The instruction manual was loose when the restraint was removed from its packaging. Additional sizing information is given in text form in the manual. The manual cannot be accessed when the child restraint is installed in the vehicle.5No BackMagna Clek OlliLU10641001354207Booster3While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.n/a40lb - 100lb / 40" - 57"5The user's manual cannot be accessed when the restraint is installed in this mode.4The belt path is not labeled.High Back/No BackMagna Clek OobrBU00000034055208Booster4No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode.533lb - 100lb / 38" - 57"3Instruction manual is difficult to find and/or use. There is no full picture of a properly restrained child located next to the sizing information. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.4Additional sizing information is given in text form. Belt path is not labeled.High Back/No BackMaxi-Cosi Rodi22-575-STO53209Booster2Seat did not arrive assembled. No illustration is given to demonstrate how to convert the booster from high-back to low-back modes.530lb - 100lb / 34" - 57"3In the manual, the iIllustration of a properly-restrained child in the restraint is not directly next to the acceptable size ranges. The owner's manual is difficult to locate when the restraint is taken out of its packaging. The instruction manual is difficult to find and/or use while the child restraint is installed. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. The warning that the rear seat is the safest place for children is not illustrated clearly in the manual.4The belt path is not labeled.High Back/No BackMaxi-Cosi Rodi XR22223-CTR54210Booster2The restraint did not arrive assembled. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode.530lb - 100lb / 34" - 57"3The instruction manual is difficult to find and/or use while the child restraint is installed. The warning that the rear seat is the safest place for children is located within text and is not prominently displayed. The warning against using the lap belt only is not given in the belt routing section of the manual.1Additional sizing information that describes a proper fit may be missing from the labels. The shoulder portion of the belt path is not labeled. There is no explicit warning against using a lap belt only on the label.High BackRecaro ProBooster50026015953211Booster54The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple.30lb - 120lb / 37" - 61"1Child restraint is not illustrated on a vehicle seat. Warning that the rear seat is the safest place is buried in a bulleted list. Warning against using the lap belt only is not given in the belt routing section of the manual. Heights/weights in the manual and on the labels do not match. Does not explicitly warn against using a lap-only belt.Manual storage cannot be accessed when the CRS is installed in this mode of use. Sizing information is located separately from the illustration depicting a properly restrained child.2Additional sizing information is given in text form. Child restraint is not pictured on a vehicle seat. Does not explicitly warn against using a lap-only belt.High BackRecaro Young Style50009772653215Booster5530lb - 80lb / 37" - 59"3Additional sizing information is given in text form. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.4Belt path is not labeled. The labels were peeling when the restraint was removed from the box.No BackSafety 1st Prospect22-595-WAL53216Booster2Seat did not arrive assembled.n/a40lb - 100lb / 43" - 57"5The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list. No manual storage is provided with this restraint.1There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information that describes a proper fit may be missing from the labels. Child restraint is not pictured on a rear vehicle seat in the labels. The belt path is not labeled. There is no explicit warning against using a lap belt only on the label.No BackSecure Comfort Deluxe Booster0304001DRM53217Booster51The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple. The shoulder belt positioning device may not allow the belt to move freely and can create slack in the belt.30lb - 110lb / 34" - 57"3Additional sizing information is given in text form. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match. Manual storage cannot be accessed when the CRS is installed in this mode of use.1Additional sizing information may be missing. No overview of modes is provided. Belt path is labeled only on one side. No specific warning is given regarding the use of a lap only belt.High Back/No BackSimpson Junior Racer8693SIM52218Booster2Seat did not arrive assembled. Tools are required for assembly. No illustration is given to demonstrate how to convert the booster from high-back to low-back modes.4Shoulder belt positioning device requires the use of two hands, but the action is simple.40lb - 100lb / 40" - 57"2The manual is difficult to find when the restraint is removed from its packaging. The instruction manual is difficult to find and/or use. The child restraint is not depicted on a vehicle seat. Heights/weights in the manual and on the labels do not match.2Additional sizing information is given in text form. The belt path is labeled and contrasting only on one side. The labeling does not state specifically that a lap-only belt may not be used.High Back/No BackSunshine Kids MontereyUS1500053219Booster3No illustration is given to demonstrate how to convert the booster from high-back mode to low-back mode. Loose parts are generated while disassembling for cleaning.530lb - 120lb / 38" - 63"5The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.4On the labeling, the height and weight requirements are not directly next to an illustration of a child in the CRS. The 'no lap belt only' warning is not illustrated on the label.High BackThe First Years B530B530-TNG55220Booster5530lb - 100lb / 38" - 57"5The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.4On the labeling, the height and weight requirements are not directly next to an illustration of a child in the CRS. The 'no lap belt only' warning is not illustrated on the label.High BackThe First Years B540B540-BAR55221Booster5530lb - 100lb / 38" - 57"4The instruction manual is difficult to find and/or use while the child restraint is installed. Additional sizing information is given in text form in the manual and is independent of the accompanying illustration. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.5High BackThe First Years B570 PathwayB570-BLB55222Booster54The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple.30lb - 100lb / 38" - 57"3Instruction manual is difficult to find and/or use. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information is given in text form. Belt path is not labeled.High BackAlpha Luxe Echelon (B)22799-MER632233-in-11Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. Loose parts are generated while disassembling for cleaning.540lb - 100lb / 43" - 52"1Instruction manual storage is difficult to find and/or use. All methods of installation are not labeled. Warning that the safest place is the rear seat is buried in a bulleted list. Names on manual/on labels do not match. Additional sizing information is scattered throughout the manual.1There is not a picture of a child properly restrained in the CRS on the labeling. Tether is not labeled in illustrations. No indication of correct harness slot height is given. Labels do not remind caregiver to tighten LATCH belt.5-ptAlpha Luxe Echelon (FF)22799-MER622243-in-12The harness clip is not labeled with placement instructions. A headhugger or body pillow covers the harness slots. Harness must be rethread to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. Loose parts are generated when disassembling for cleaning.4Lower attachments require twisting to remove from the vehicle. No storage system exists for LATCH/tether.22lb - 40lb / 34" - 43"1Manual was loose in the box. Manual storage is difficult to find and use. No picture of child in the child restraint. Airbag warning is buried in a bulleted list. User must read text to prepare and route LATCH belt. Names in manual and on seat do not match.3There is not a picture of a child properly restrained in the CRS on the labeling. No additional sizing information given to achieve a proper fit. No additional harness slot height adjustment information.5-ptAlpha Luxe Echelon (RF)22799-MER622253-in-13Harness clip is not labeled. There is a head hugger or body pillow blocking the harness slots from being visible. The harness must be rethread for child's growth. Multiple actions are required to convert the seat to rear-facing, which must be followed in the manual. Loose parts exist when disassembling for cleaning.1May be uncomfortable for larger hands to route the belt through the path. A printed/molded line is present on the CRS that must be leveled to the ground. Twisting is required to remove the LATCH attachments from the lower anchors in the vehicle. No ded5lb - 35lb / 19" - 36"2Instruction manual is difficult to find and/or use. No additional sizing information is given. Warning that the rear seat is the safest place is buried in a bulleted list. Names on the manual and labels do not match.3Additional sizing information is given in text form. Belt path is not labeled.High BackAlpha Sport 3 Phase (B)22-458-NYC632263-in-12Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual.4The shoulder belt may fall out of the shoulder belt positioning device.40lb - 80lb / 43" - 52"4The instruction manual is difficult to find and/or use while the child restraint is installed. No additional sizing information is given in the manual.4The belt path is not labeled.High BackSafety 1st Alpha Omega Elite (B)22195-SVS642473-in-11Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.540lb - 100lb / 43" - 52"3In the instructions, the tether is shown but not labeled with each mode of installation. In the manual, there are no instructions describing how to remove LATCH attachments from storage. The instruction manual storage is difficult to find and/or use while the child restraint is installed. No full picture exists of a properly restrained child in the child restraint in the owner's manual.4Harness slots are not labeled to indicate which may be used in the rear-facing mode and which may be used in the forward-facing mode. No illustration is given on the labels to show the caregiver how to prepare LATCH attachments for use.5-ptSafety 1st Alpha Omega Elite (FF)22195-SVS632483-in-13The harness clip is not labeled with placement instructions. The harness height may be difficult to adjust. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.2Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. No storage area exists for the LATCH attachments and/or the22lb - 50lb / 34" - 45"5The LATCH attachments arrive stored, and the owner's manual does not describe how to remove them from storage prior to first use.3Harness slots are not labeled to indicate which may be used in the rear-facing mode and which may be used in the forward-facing mode. There is no picture of a child in the child restraint. Labels do not illustrate how to prepare LATCH attachments for use.5-ptSafety 1st Alpha Omega Elite (RF)22195-SVS622493-in-12The restraint was not set for the smallest possible occupant. The harness clip is not labeled to indicate its correct placement. The harness is difficult to adjust for child's growth. When disassembling for cleaning, mandatory pieces to the restraint must be removed and could be misplaced.1It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to5lb - 35lb / 19" - 36"3The instruction manual is difficult to find and/or use while the child restraint is installed. There is no full picture of a properly-restrained child in the instruction manual directly next to sizing information. Additional sizing information is given in text form in the manual. The warning that the rear seat is the safest place for children is located among unrelated warnings in a bulleted list.3Additional sizing information is not illustrated and is given in text form only on the labels. The belt path is not labeled.High Back/No BackSafety 1st Intera (B)22461-BGG622503-in-11Conversion to this mode from another mode requires multiple actions; caregiver must read instruction manual. No illustration is given on the labeling to demonstrate how to convert the booster from high-back mode to low-back mode. While disassembling for cleaning, mandatory pieces may become loose and could be misplaced.n/a40lb - 100lb / 43" - 57"2The instruction manual storage may be difficult to find and/or use while the child restraint is installed. No full picture exists of a properly restrained child in the restraint directly next to sizing information in the owner's manual. No additional sizing information is given in the owner's manual. The warning that the safest place for children is the rear seat is located among other unrelated warnings in a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route the LATCH belt properly. The tether is not labeled in the illustrations showing modes of use.1There is not a picture of a child properly restrained in the CRS on the labeling. Additional sizing information is not shown in an illustration and is given in text form only. No indication of correct harness height is given. The belt path is not labeled. The labels do not remind the caregiver to tighten the LATCH belt. The tether is not labeled in the illustrations showing modes of use.5-ptSafety 1st Intera (FF)22461-BGG622513-in-12The harness clip is not labeled with placement instructions. A head hugger or body pillow covers the harness slots. The harness must be rethread to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use; the caregiver must read the instructions. The harness must be taken out and rethreaded to disassemble the seat for cleaning. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.3Interference is possible between a seat component and the seat belt/LATCH belt. The restraint is equipped with hook-like LATCH attachments which may require twisting to remove from the vehicle. The LATCH attachment and/or tether storage area is not clea22lb - 40lb / 34" - 43"